Location
ADT_A01/MSH[0]/MSH-11(Processing ID)
Description
Element 'Processing ID' is specified as required (R) but not present in the message
Type
Required field missing
Location
ADT_A01/EVN[0]/EVN-2(Recorded Date/Time)
Description
Element 'Recorded Date/Time' is specified as required (R) but not present in the message
Type
Required field missing
Location
ADT_A01/EVN[0]
Value--- Missing --
A08
Description
Field 'EVN-1' appears in the message but is specified as forbidden (X) in the message profile
Type
Element not allowed
Location
ADT_A01/EVN[0]
Value--- Missing --
20221114101411
Description
Field 'EVN-3' appears in the message but is specified as forbidden (X) in the message profile
Type
Element not allowed
Location
ADT_A01/PID[0]/PID-3(Patient Identifier List)[0]/CX-5(identifier type code)
Value--- Missing --
INS-NIR
Description
Element 'identifier type code' has length 7 which exceeds the maximum length defined in the message profile (5)
Type
Length exceeded
Location
ADT_A01/PID[0]/PID-3(Patient Identifier List)[0]/CX-5(identifier type code)
Value--- Missing --
INS-NIR
Description
Code INS-NIR not found in table HL70203. Possible values are AM, AN, ANC, AND, ANON, ANT, APRN, BA, BC, BR, BRN, CC, CY, DDS, DEA, DFN, DI, DL, DN, DO, DPM, DR, DS, EI, EN, FI, GI, GL, GN, HC, IND, JHN, LI, LN, LR, MA, MB, MC, MCD, MCN, MCR, MD, MI, MR, MRT, MS, NE, NH, NI, NII, NIIP, NNxxx, NP, NPI, OD, PA, PCN, PE, PEN, PI, PN, PNT, PPN, PRC, PRN, PT, QA, RI, RN, RPH, RR, RRI, SL, SN, SR, SS, TAX, TN, U, UPIN, VN, VS, WC, WCN, XX
Type
Table value not found
HL7Table
1.3.6.1.4.12559.11.1.3.1.5#0203
Location
ADT_A01/PID[0]/PID-32(Identity Reliability Code)[0]
Value--- Missing --
VALI
Description
Code VALI not found in table HL70445. Possible values are AL
Type
Table value not found
HL7Table
1.3.6.1.4.12559.11.1.3.1.5#0445
Location
ADT_A01/PV1
Description
Element 'PV1' is specified as required (R) but not present in the message
Type
Segment sequence error
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-2(universal ID)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-3(universal ID type)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-2(universal ID)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-3(universal ID type)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-2(universal ID)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-3(universal ID type)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-2(universal ID)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-3(universal ID type)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH[0]/MSH-18(Character Set)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/PID[0]/PID-3(Patient Identifier List)[0]/CX-4(assigning authority)/HD-2(universal ID)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/PID[0]/PID-3(Patient Identifier List)[0]/CX-4(assigning authority)/HD-3(universal ID type)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/PID[0]/PID-18(Patient Account Number)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/PID[0]/PID-30(Patient Death Indicator)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/PID[0]/PID-36(Breed Code)
Description
The optionality of this element is set as 'conditional' and no rule has been defined, refer to the specification to check the optionality which applies in the context of this message
Type
Conditional
Location
ADT_A01/MSH
Description
MSH is repeated at least 0 time(s)
Type
Cardinality
Location
ADT_A01/MSH
Description
MSH is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-1(Field Separator)
Description
Field Separator shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-1(Field Separator)
Description
Field Separator is repeated at least 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-1(Field Separator)
Description
Field Separator is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-1(Field Separator)[0]
Description
Field Separator shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-1(Field Separator)[0]
Description
Datatype ST is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-1(Field Separator)[0]
Description
Length of the element does not exceed the length defined in the message profile (1)
Type
Length
Location
ADT_A01/MSH[0]/MSH-1(Field Separator)[0]
Description
Rule 'Primitive value '%s' requires to be anything' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-2(Encoding Characters)
Description
Encoding Characters shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-2(Encoding Characters)
Description
Encoding Characters is repeated at least 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-2(Encoding Characters)
Description
Encoding Characters is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-2(Encoding Characters)[0]
Description
Encoding Characters shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-2(Encoding Characters)[0]
Description
Datatype ST is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-2(Encoding Characters)[0]
Description
Length of the element does not exceed the length defined in the message profile (4)
Type
Length
Location
ADT_A01/MSH[0]/MSH-2(Encoding Characters)[0]
Description
Rule 'Primitive value '%s' requires to be anything' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)
Description
Sending Application shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)
Description
Sending Application is repeated at least 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)
Description
Sending Application is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]
Description
Sending Application shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]
Description
Datatype HD is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]
Description
Length of the element does not exceed the length defined in the message profile (227)
Type
Length
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-1(namespace ID)
Description
namespace ID shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-1(namespace ID)
Description
Datatype IS is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-1(namespace ID)
Description
Length of the element does not exceed the length defined in the message profile (20)
Type
Length
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-1(namespace ID)
Description
Rule 'Primitive value '%s' requires to be shorter than 200 characters' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-2(universal ID)
Description
Datatype ST is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-2(universal ID)
Description
Length of the element does not exceed the length defined in the message profile (199)
Type
Length
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-2(universal ID)
Description
Rule 'Primitive value '%s' requires to be anything' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-3(universal ID type)
Description
Datatype ID is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-3(universal ID type)
Description
Length of the element does not exceed the length defined in the message profile (6)
Type
Length
Location
ADT_A01/MSH[0]/MSH-3(Sending Application)[0]/HD-3(universal ID type)
Description
Rule 'Primitive value '%s' requires to be shorter than 200 characters' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)
Description
Sending Facility shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)
Description
Sending Facility is repeated at least 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)
Description
Sending Facility is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]
Description
Sending Facility shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]
Description
Datatype HD is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]
Description
Length of the element does not exceed the length defined in the message profile (227)
Type
Length
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-1(namespace ID)
Description
namespace ID shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-1(namespace ID)
Description
Datatype IS is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-1(namespace ID)
Description
Length of the element does not exceed the length defined in the message profile (20)
Type
Length
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-1(namespace ID)
Description
Rule 'Primitive value '%s' requires to be shorter than 200 characters' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-2(universal ID)
Description
Datatype ST is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-2(universal ID)
Description
Length of the element does not exceed the length defined in the message profile (199)
Type
Length
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-2(universal ID)
Description
Rule 'Primitive value '%s' requires to be anything' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-3(universal ID type)
Description
Datatype ID is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-3(universal ID type)
Description
Length of the element does not exceed the length defined in the message profile (6)
Type
Length
Location
ADT_A01/MSH[0]/MSH-4(Sending Facility)[0]/HD-3(universal ID type)
Description
Rule 'Primitive value '%s' requires to be shorter than 200 characters' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)
Description
Receiving Application shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)
Description
Receiving Application is repeated at least 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)
Description
Receiving Application is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]
Description
Receiving Application shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]
Description
Datatype HD is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]
Description
Length of the element does not exceed the length defined in the message profile (227)
Type
Length
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-1(namespace ID)
Description
namespace ID shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-1(namespace ID)
Description
Datatype IS is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-1(namespace ID)
Description
Length of the element does not exceed the length defined in the message profile (20)
Type
Length
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-1(namespace ID)
Description
Rule 'Primitive value '%s' requires to be shorter than 200 characters' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-2(universal ID)
Description
Datatype ST is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-2(universal ID)
Description
Length of the element does not exceed the length defined in the message profile (199)
Type
Length
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-2(universal ID)
Description
Rule 'Primitive value '%s' requires to be anything' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-3(universal ID type)
Description
Datatype ID is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-3(universal ID type)
Description
Length of the element does not exceed the length defined in the message profile (6)
Type
Length
Location
ADT_A01/MSH[0]/MSH-5(Receiving Application)[0]/HD-3(universal ID type)
Description
Rule 'Primitive value '%s' requires to be shorter than 200 characters' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)
Description
Receiving Facility shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)
Description
Receiving Facility is repeated at least 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)
Description
Receiving Facility is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]
Description
Receiving Facility shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]
Description
Datatype HD is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]
Description
Length of the element does not exceed the length defined in the message profile (227)
Type
Length
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-1(namespace ID)
Description
namespace ID shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-1(namespace ID)
Description
Datatype IS is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-1(namespace ID)
Description
Length of the element does not exceed the length defined in the message profile (20)
Type
Length
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-1(namespace ID)
Description
Rule 'Primitive value '%s' requires to be shorter than 200 characters' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-2(universal ID)
Description
Datatype ST is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-2(universal ID)
Description
Length of the element does not exceed the length defined in the message profile (199)
Type
Length
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-2(universal ID)
Description
Rule 'Primitive value '%s' requires to be anything' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-3(universal ID type)
Description
Datatype ID is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-3(universal ID type)
Description
Length of the element does not exceed the length defined in the message profile (6)
Type
Length
Location
ADT_A01/MSH[0]/MSH-6(Receiving Facility)[0]/HD-3(universal ID type)
Description
Rule 'Primitive value '%s' requires to be shorter than 200 characters' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)
Description
Date/Time Of Message shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)
Description
Date/Time Of Message is repeated at least 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)
Description
Date/Time Of Message is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)[0]
Description
Date/Time Of Message shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)[0]
Description
Datatype TS is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)[0]
Description
Length of the element does not exceed the length defined in the message profile (26)
Type
Length
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)[0]/TS-1(time)
Description
time shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)[0]/TS-1(time)
Description
Datatype DTM is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)[0]/TS-1(time)
Description
Length of the element does not exceed the length defined in the message profile (24)
Type
Length
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)[0]/TS-1(time)
Description
Rule 'Primitive value '%s' requires to be empty or a HL7 datetime string' is fulfilled
Type
Format
Location
ADT_A01/MSH[0]/MSH-7(Date/Time Of Message)[0]/TS-2(degree of precision)
Description
degree of precision shall not be present
Type
Forbidden element
Location
ADT_A01/MSH[0]/MSH-9(Message Type)
Description
Message Type shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-9(Message Type)
Description
Message Type is repeated at least 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-9(Message Type)
Description
Message Type is repeated at most 1 time(s)
Type
Cardinality
Location
ADT_A01/MSH[0]/MSH-9(Message Type)[0]
Description
Message Type shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-9(Message Type)[0]
Description
Datatype MSG is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-9(Message Type)[0]
Description
Length of the element does not exceed the length defined in the message profile (15)
Type
Length
Location
ADT_A01/MSH[0]/MSH-9(Message Type)[0]/MSG-1(message code)
Description
message code shall be present
Type
Required element
Location
ADT_A01/MSH[0]/MSH-9(Message Type)[0]/MSG-1(message code)
Description
Datatype ID is used
Type
Datatype
Location
ADT_A01/MSH[0]/MSH-9(Message Type)[0]/MSG-1(message code)
Description
Length of the element does not exceed the length defined in the message profile (3)
Type
Length
Only the first 100 reports are displayed, download the report to access the complete list