Annuaire Santé
1.0.0-ballot-3 - trial-use France flag

This page is part of the Guide d'implémentation FHIR - Annuaire de santé (v1.0.0-ballot-3: Release) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 1.1.0. For a full list of available versions, see the Directory of published versions

Extension: AsSmartCardExtension - Detailed Descriptions

Active as of 2023-12-19

Definitions for the as-ext-smartcard extension.

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Extension créée dans le cadre de l'Annuaire Santé pour décrire les informations de la carte CPx utilisée comme moyen d’identification des personnes physiques.

ShortCarteProfessionnel : Données descriptives du moyen d’identification des personnes physiques via une carte de professionnel. La carte est rattachée à l’exercice d’une profession donnée et non au professionnel lui-même, un professionnel exerçant simultanément deux professions a deux cartes.
2. Extension.extension:type
Slice Nametype
ShorttypeCarte : Type de carte de professionnel (CPx)
Control0..1
4. Extension.extension:type.extension
Control0..0
6. Extension.extension:type.url
Fixed Valuetype
8. Extension.extension:type.value[x]
BindingUnless not suitable, these codes SHALL be taken from JDV_J128-TypeCarte-RASS
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
10. Extension.extension:number
Slice Namenumber
ShortnumeroCarte : Numéro de carte du professionnel.
Control0..1
12. Extension.extension:number.extension
Control0..0
14. Extension.extension:number.url
Fixed Valuenumber
16. Extension.extension:number.value[x]
ShortNuméro de carte du professionnel.
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
18. Extension.extension:period
Slice Nameperiod
ShortPériode de validité de la carte.
Control0..1
20. Extension.extension:period.extension
Control0..0
22. Extension.extension:period.url
Fixed Valueperiod
24. Extension.extension:period.value[x]
TypePeriod
[x] NoteSee Choice of Data Types for further information about how to use [x]
26. Extension.extension:period.value[x].start
ShortdateDebutValidite : Date de début de validité de la carte
28. Extension.extension:period.value[x].end
ShortdateFinValidite : Date de fin de validité de la carte
30. Extension.extension:cancellationDate
Slice NamecancellationDate
ShortdateOpposition : Date de mise en opposition de la carte.
Control0..1
32. Extension.extension:cancellationDate.extension
Control0..0
34. Extension.extension:cancellationDate.url
Fixed ValuecancellationDate
36. Extension.extension:cancellationDate.value[x]
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
38. Extension.extension:date
Slice Namedate
Control0..*
40. Extension.extension:date.url
Fixed Valuedate
42. Extension.url
Fixed Valuehttps://interop.esante.gouv.fr/ig/fhir/annuaire/StructureDefinition/as-ext-smartcard
44. Extension.value[x]
Control0..0

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Extension créée dans le cadre de l'Annuaire Santé pour décrire les informations de la carte CPx utilisée comme moyen d’identification des personnes physiques.


Optional Extension Element - found in all resources.

ShortCarteProfessionnel : Données descriptives du moyen d’identification des personnes physiques via une carte de professionnel. La carte est rattachée à l’exercice d’une profession donnée et non au professionnel lui-même, un professionnel exerçant simultanément deux professions a deux cartes.Optional Extensions Element
Control0..*
This element is affected by the following invariants: ele-1
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension:type
Slice Nametype
Definition

An Extension

ShorttypeCarte : Type de carte de professionnel (CPx)Additional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
4. Extension.extension:type.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. Extension.extension:type.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuetype
8. Extension.extension:type.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingUnless not suitable, these codes SHALL be taken from For codes, see JDV_J128-TypeCarte-RASS
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.extension:number
Slice Namenumber
Definition

An Extension

ShortnumeroCarte : Numéro de carte du professionnel.Additional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Extension.extension:number.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
14. Extension.extension:number.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuenumber
16. Extension.extension:number.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortNuméro de carte du professionnel.Value of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Extension.extension:period
Slice Nameperiod
Definition

An Extension

ShortPériode de validité de la carte.Additional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Extension.extension:period.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
22. Extension.extension:period.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valueperiod
24. Extension.extension:period.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypePeriod, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.extension:period.value[x].start
Definition

The start of the period. The boundary is inclusive.

ShortdateDebutValidite : Date de début de validité de la carteStarting time with inclusive boundary
Comments

If the low element is missing, the meaning is that the low boundary is not known.

Control0..1
This element is affected by the following invariants: ele-1, per-1
TypedateTime
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Extension.extension:period.value[x].end
Definition

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

ShortdateFinValidite : Date de fin de validité de la carteEnd time with inclusive boundary, if not ongoing
Comments

The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

Control0..1
This element is affected by the following invariants: ele-1, per-1
TypedateTime
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Extension.extension:cancellationDate
Slice NamecancellationDate
Definition

An Extension

ShortdateOpposition : Date de mise en opposition de la carte.Additional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Extension.extension:cancellationDate.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
34. Extension.extension:cancellationDate.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuecancellationDate
36. Extension.extension:cancellationDate.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypedateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Extension.extension:date
Slice Namedate
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Extension.extension:date.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuedate
42. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuehttps://interop.esante.gouv.fr/ig/fhir/annuaire/StructureDefinition/as-ext-smartcard
44. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
This element is affected by the following invariants: ele-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Extension créée dans le cadre de l'Annuaire Santé pour décrire les informations de la carte CPx utilisée comme moyen d’identification des personnes physiques.

ShortCarteProfessionnel : Données descriptives du moyen d’identification des personnes physiques via une carte de professionnel. La carte est rattachée à l’exercice d’une profession donnée et non au professionnel lui-même, un professionnel exerçant simultanément deux professions a deux cartes.
Control0..*
This element is affected by the following invariants: ele-1
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
4. Extension.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Standards StatusNormative (from Normative)
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. Extension.extension:type
Slice Nametype
Definition

An Extension

ShorttypeCarte : Type de carte de professionnel (CPx)
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Extension.extension:type.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
10. Extension.extension:type.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
12. Extension.extension:type.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuetype
14. Extension.extension:type.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingUnless not suitable, these codes SHALL be taken from JDV_J128-TypeCarte-RASS
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.extension:number
Slice Namenumber
Definition

An Extension

ShortnumeroCarte : Numéro de carte du professionnel.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Extension.extension:number.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
20. Extension.extension:number.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
22. Extension.extension:number.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuenumber
24. Extension.extension:number.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortNuméro de carte du professionnel.
Control0..1
This element is affected by the following invariants: ele-1
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.extension:period
Slice Nameperiod
Definition

An Extension

ShortPériode de validité de la carte.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Extension.extension:period.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
30. Extension.extension:period.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. Extension.extension:period.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valueperiod
34. Extension.extension:period.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypePeriod
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Extension.extension:period.value[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
38. Extension.extension:period.value[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Standards StatusNormative (from Normative)
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.value[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
40. Extension.extension:period.value[x].start
Definition

The start of the period. The boundary is inclusive.

ShortdateDebutValidite : Date de début de validité de la carte
Comments

If the low element is missing, the meaning is that the low boundary is not known.

Control0..1
This element is affected by the following invariants: ele-1, per-1
TypedateTime
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Extension.extension:period.value[x].end
Definition

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

ShortdateFinValidite : Date de fin de validité de la carte
Comments

The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

Control0..1
This element is affected by the following invariants: ele-1, per-1
TypedateTime
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Extension.extension:cancellationDate
Slice NamecancellationDate
Definition

An Extension

ShortdateOpposition : Date de mise en opposition de la carte.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Extension.extension:cancellationDate.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
48. Extension.extension:cancellationDate.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
50. Extension.extension:cancellationDate.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuecancellationDate
52. Extension.extension:cancellationDate.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Extension.extension:date
Slice Namedate
Definition

An Extension

ShortExtension
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
56. Extension.extension:date.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
58. Extension.extension:date.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Standards StatusNormative (from Normative)
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
60. Extension.extension:date.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuedate
62. Extension.extension:date.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuehttps://interop.esante.gouv.fr/ig/fhir/annuaire/StructureDefinition/as-ext-smartcard
66. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..0
This element is affected by the following invariants: ele-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))