Annuaire Santé
1.0.1 - trial-use
Annuaire Santé
1.0.1 - trial-use
This page is part of the Guide d'implémentation FHIR - Annuaire de santé (v1.0.1: Release) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 1.1.0. For a full list of available versions, see the Directory of published versions
| Active as of 2024-04-25 |
Definitions for the as-ext-healthcareservice-authorization extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Extension créée dans le cadre de l'Annuaire Santé pour décrire les autorisations des activités sanitaires, sociales, médico-sociales et d'enseignement et des équipements matériels lourds autorisés. |
| Short | AS HealthcareService Autorization Extension |
| 2. Extension.extension:dateAuthorization | |
| Slice Name | dateAuthorization |
| Short | Date de délivrance de l’autorisation. |
| Control | 0..1 |
| 4. Extension.extension:dateAuthorization.extension | |
| Control | 0..0 |
| 6. Extension.extension:dateAuthorization.url | |
| Fixed Value | dateAuthorization |
| 8. Extension.extension:dateAuthorization.value[x] | |
| Type | date |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 10. Extension.extension:periodAuthorization | |
| Slice Name | periodAuthorization |
| Control | 0..1 |
| 12. Extension.extension:periodAuthorization.extension | |
| Control | 0..0 |
| 14. Extension.extension:periodAuthorization.url | |
| Fixed Value | periodAuthorization |
| 16. Extension.extension:periodAuthorization.value[x] | |
| Type | Period |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| 18. Extension.extension:periodAuthorization.value[x].start | |
| Short | Date de première mise en œuvre. |
| 20. Extension.extension:periodAuthorization.value[x].end | |
| Short | Date de fin de mise en œuvre. |
| 22. Extension.extension:dateUpdateAuthorization | |
| Slice Name | dateUpdateAuthorization |
| Short | Date de dernière mise à jour de l’autorisation. |
| Control | 0..1 |
| 24. Extension.extension:dateUpdateAuthorization.extension | |
| Control | 0..0 |
| 26. Extension.extension:dateUpdateAuthorization.url | |
| Fixed Value | dateUpdateAuthorization |
| 28. Extension.extension:dateUpdateAuthorization.value[x] | |
| Type | date |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 30. Extension.extension:deleteAuthorization | |
| Slice Name | deleteAuthorization |
| Short | Indicateur de suppression de l'autorisation. |
| Control | 0..1 |
| 32. Extension.extension:deleteAuthorization.extension | |
| Control | 0..0 |
| 34. Extension.extension:deleteAuthorization.url | |
| Fixed Value | deleteAuthorization |
| 36. Extension.extension:deleteAuthorization.value[x] | |
| Type | boolean |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 38. Extension.extension:dateLastInstallation | |
| Slice Name | dateLastInstallation |
| Short | Date à laquelle le dernier constat d’installation des places est réalisé. |
| Control | 0..1 |
| 40. Extension.extension:dateLastInstallation.extension | |
| Control | 0..0 |
| 42. Extension.extension:dateLastInstallation.url | |
| Fixed Value | dateLastInstallation |
| 44. Extension.extension:dateLastInstallation.value[x] | |
| Type | date |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 46. Extension.extension:deleteInstallation | |
| Slice Name | deleteInstallation |
| Short | Indicateur de suppression de l’installation. |
| Control | 0..1 |
| 48. Extension.extension:deleteInstallation.extension | |
| Control | 0..0 |
| 50. Extension.extension:deleteInstallation.url | |
| Fixed Value | deleteInstallation |
| 52. Extension.extension:deleteInstallation.value[x] | |
| Type | boolean |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 54. Extension.extension:sourceReportInstallation | |
| Slice Name | sourceReportInstallation |
| Short | Source ayant permis le constat d'installation. |
| Control | 0..1 |
| 56. Extension.extension:sourceReportInstallation.extension | |
| Control | 0..0 |
| 58. Extension.extension:sourceReportInstallation.url | |
| Fixed Value | sourceReportInstallation |
| 60. Extension.extension:sourceReportInstallation.value[x] | |
| Binding | The codes SHALL be taken from ValueSet pour l'ensemble des codes concepts de la TRE avec l'url : https://mos.esante.gouv.fr/NOS/TRE_R301-SourceInformationInstallation/FHIR/TRE-R301-SourceInformationInstallation (required to https://interop.esante.gouv.fr/ig/fhir/annuaire/ValueSet/VS-TRE-R301-SourceInformationInstallation) |
| Type | CodeableConcept |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| 62. Extension.url | |
| Fixed Value | https://interop.esante.gouv.fr/ig/fhir/annuaire/StructureDefinition/as-ext-healthcareservice-authorization |
| 64. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Extension créée dans le cadre de l'Annuaire Santé pour décrire les autorisations des activités sanitaires, sociales, médico-sociales et d'enseignement et des équipements matériels lourds autorisés. Optional Extension Element - found in all resources. |
| Short | AS HealthcareService Autorization ExtensionOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension:dateAuthorization | |
| Slice Name | dateAuthorization |
| Definition | An Extension |
| Short | Date de délivrance de l’autorisation.Additional content defined by implementations |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 4. Extension.extension:dateAuthorization.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:dateAuthorization.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | dateAuthorization |
| 8. Extension.extension:dateAuthorization.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Extension.extension:periodAuthorization | |
| Slice Name | periodAuthorization |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 12. Extension.extension:periodAuthorization.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 14. Extension.extension:periodAuthorization.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | periodAuthorization |
| 16. Extension.extension:periodAuthorization.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Period, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Extension.extension:periodAuthorization.value[x].start | |
| Definition | The start of the period. The boundary is inclusive. |
| Short | Date de première mise en œuvre.Starting time with inclusive boundary |
| Comments | If the low element is missing, the meaning is that the low boundary is not known. |
| Control | 0..1 This element is affected by the following invariants: ele-1, per-1 |
| Type | dateTime |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.extension:periodAuthorization.value[x].end | |
| Definition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. |
| Short | Date de fin de mise en œuvre.End time with inclusive boundary, if not ongoing |
| Comments | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. |
| Control | 0..1 This element is affected by the following invariants: ele-1, per-1 |
| Type | dateTime |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Meaning if Missing | If the end of the period is missing, it means that the period is ongoing |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Extension.extension:dateUpdateAuthorization | |
| Slice Name | dateUpdateAuthorization |
| Definition | An Extension |
| Short | Date de dernière mise à jour de l’autorisation.Additional content defined by implementations |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 24. Extension.extension:dateUpdateAuthorization.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 26. Extension.extension:dateUpdateAuthorization.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | dateUpdateAuthorization |
| 28. Extension.extension:dateUpdateAuthorization.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 30. Extension.extension:deleteAuthorization | |
| Slice Name | deleteAuthorization |
| Definition | An Extension |
| Short | Indicateur de suppression de l'autorisation.Additional content defined by implementations |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 32. Extension.extension:deleteAuthorization.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 34. Extension.extension:deleteAuthorization.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | deleteAuthorization |
| 36. Extension.extension:deleteAuthorization.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 38. Extension.extension:dateLastInstallation | |
| Slice Name | dateLastInstallation |
| Definition | An Extension |
| Short | Date à laquelle le dernier constat d’installation des places est réalisé.Additional content defined by implementations |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 40. Extension.extension:dateLastInstallation.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:dateLastInstallation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | dateLastInstallation |
| 44. Extension.extension:dateLastInstallation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:deleteInstallation | |
| Slice Name | deleteInstallation |
| Definition | An Extension |
| Short | Indicateur de suppression de l’installation.Additional content defined by implementations |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 48. Extension.extension:deleteInstallation.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 50. Extension.extension:deleteInstallation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | deleteInstallation |
| 52. Extension.extension:deleteInstallation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 54. Extension.extension:sourceReportInstallation | |
| Slice Name | sourceReportInstallation |
| Definition | An Extension |
| Short | Source ayant permis le constat d'installation.Additional content defined by implementations |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 56. Extension.extension:sourceReportInstallation.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 58. Extension.extension:sourceReportInstallation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | sourceReportInstallation |
| 60. Extension.extension:sourceReportInstallation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Binding | The codes SHALL be taken from For codes, see ValueSet pour l'ensemble des codes concepts de la TRE avec l'url : https://mos.esante.gouv.fr/NOS/TRE_R301-SourceInformationInstallation/FHIR/TRE-R301-SourceInformationInstallation (required to https://interop.esante.gouv.fr/ig/fhir/annuaire/ValueSet/VS-TRE-R301-SourceInformationInstallation) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 62. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | https://interop.esante.gouv.fr/ig/fhir/annuaire/StructureDefinition/as-ext-healthcareservice-authorization |
| 64. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 This element is affected by the following invariants: ele-1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Extension créée dans le cadre de l'Annuaire Santé pour décrire les autorisations des activités sanitaires, sociales, médico-sociales et d'enseignement et des équipements matériels lourds autorisés. |
| Short | AS HealthcareService Autorization Extension |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 4. Extension.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Standards Status | Normative (from Normative) |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:dateAuthorization | |
| Slice Name | dateAuthorization |
| Definition | An Extension |
| Short | Date de délivrance de l’autorisation. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:dateAuthorization.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 10. Extension.extension:dateAuthorization.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:dateAuthorization.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | dateAuthorization |
| 14. Extension.extension:dateAuthorization.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | date |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:periodAuthorization | |
| Slice Name | periodAuthorization |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:periodAuthorization.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 20. Extension.extension:periodAuthorization.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:periodAuthorization.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | periodAuthorization |
| 24. Extension.extension:periodAuthorization.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Period |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:periodAuthorization.value[x].id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 28. Extension.extension:periodAuthorization.value[x].extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Standards Status | Normative (from Normative) |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 30. Extension.extension:periodAuthorization.value[x].start | |
| Definition | The start of the period. The boundary is inclusive. |
| Short | Date de première mise en œuvre. |
| Comments | If the low element is missing, the meaning is that the low boundary is not known. |
| Control | 0..1 This element is affected by the following invariants: ele-1, per-1 |
| Type | dateTime |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 32. Extension.extension:periodAuthorization.value[x].end | |
| Definition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. |
| Short | Date de fin de mise en œuvre. |
| Comments | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. |
| Control | 0..1 This element is affected by the following invariants: ele-1, per-1 |
| Type | dateTime |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Meaning if Missing | If the end of the period is missing, it means that the period is ongoing |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Extension.extension:dateUpdateAuthorization | |
| Slice Name | dateUpdateAuthorization |
| Definition | An Extension |
| Short | Date de dernière mise à jour de l’autorisation. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 36. Extension.extension:dateUpdateAuthorization.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 38. Extension.extension:dateUpdateAuthorization.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 40. Extension.extension:dateUpdateAuthorization.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | dateUpdateAuthorization |
| 42. Extension.extension:dateUpdateAuthorization.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | date |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 44. Extension.extension:deleteAuthorization | |
| Slice Name | deleteAuthorization |
| Definition | An Extension |
| Short | Indicateur de suppression de l'autorisation. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 46. Extension.extension:deleteAuthorization.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 48. Extension.extension:deleteAuthorization.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 50. Extension.extension:deleteAuthorization.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | deleteAuthorization |
| 52. Extension.extension:deleteAuthorization.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | boolean |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 54. Extension.extension:dateLastInstallation | |
| Slice Name | dateLastInstallation |
| Definition | An Extension |
| Short | Date à laquelle le dernier constat d’installation des places est réalisé. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 56. Extension.extension:dateLastInstallation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 58. Extension.extension:dateLastInstallation.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 60. Extension.extension:dateLastInstallation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | dateLastInstallation |
| 62. Extension.extension:dateLastInstallation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | date |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 64. Extension.extension:deleteInstallation | |
| Slice Name | deleteInstallation |
| Definition | An Extension |
| Short | Indicateur de suppression de l’installation. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 66. Extension.extension:deleteInstallation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 68. Extension.extension:deleteInstallation.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 70. Extension.extension:deleteInstallation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | deleteInstallation |
| 72. Extension.extension:deleteInstallation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | boolean |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 74. Extension.extension:sourceReportInstallation | |
| Slice Name | sourceReportInstallation |
| Definition | An Extension |
| Short | Source ayant permis le constat d'installation. |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 76. Extension.extension:sourceReportInstallation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| XML Format | In the XML format, this property is represented as an attribute. |
| 78. Extension.extension:sourceReportInstallation.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 This element is affected by the following invariants: ele-1 |
| Type | Extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: |
| 80. Extension.extension:sourceReportInstallation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | sourceReportInstallation |
| 82. Extension.extension:sourceReportInstallation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Binding | The codes SHALL be taken from ValueSet pour l'ensemble des codes concepts de la TRE avec l'url : https://mos.esante.gouv.fr/NOS/TRE_R301-SourceInformationInstallation/FHIR/TRE-R301-SourceInformationInstallation (required to https://interop.esante.gouv.fr/ig/fhir/annuaire/ValueSet/VS-TRE-R301-SourceInformationInstallation) |
| Type | CodeableConcept |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 84. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | https://interop.esante.gouv.fr/ig/fhir/annuaire/StructureDefinition/as-ext-healthcareservice-authorization |
| 86. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 This element is affected by the following invariants: ele-1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |