Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social
0.2.0 - trial-use France flag

This page is part of the Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social (v0.2.0: Release) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 0.5.0. For a full list of available versions, see the Directory of published versions

Extension: ROROrganizationPrice - Detailed Descriptions

Active as of 2024-01-12

Definitions for the ror-organization-price extension.

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Extension créée dans le cadre du ROR pour permettre de définir les tarifs des prestations et services d'une entité géographique.

2. Extension.extension
Control3..?
4. Extension.extension:priceType
Slice NamepriceType
Control1..1
6. Extension.extension:priceType.extension
Control0..0
8. Extension.extension:priceType.url
Fixed ValuepriceType
10. Extension.extension:priceType.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J36-TypeTarif-ROR/FHIR/JDV-J36-TypeTarif-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
12. Extension.extension:priceUnit
Slice NamepriceUnit
Control1..1
14. Extension.extension:priceUnit.extension
Control0..0
16. Extension.extension:priceUnit.url
Fixed ValuepriceUnit
18. Extension.extension:priceUnit.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J205-UnitePrix-ROR/FHIR/JDV-J205-UnitePrix-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
20. Extension.extension:amount
Slice Nameamount
Control1..1
22. Extension.extension:amount.extension
Control0..0
24. Extension.extension:amount.url
Fixed Valueamount
26. Extension.extension:amount.value[x]
TypeMoney
[x] NoteSee Choice of Data Types for further information about how to use [x]
28. Extension.extension:startDate
Slice NamestartDate
Control0..1
30. Extension.extension:startDate.extension
Control0..0
32. Extension.extension:startDate.url
Fixed ValuestartDate
34. Extension.extension:startDate.value[x]
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
36. Extension.extension:under60
Slice Nameunder60
Control0..1
38. Extension.extension:under60.extension
Control0..0
40. Extension.extension:under60.url
Fixed Valueunder60
42. Extension.extension:under60.value[x]
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
44. Extension.extension:deliveryIncluded
Slice NamedeliveryIncluded
Control0..*
46. Extension.extension:deliveryIncluded.extension
Control0..0
48. Extension.extension:deliveryIncluded.url
Fixed ValuedeliveryIncluded
50. Extension.extension:deliveryIncluded.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J206-PrestationNonObligatoireIncluse-ROR/FHIR/JDV-J206-PrestationNonObligatoireIncluse-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
52. Extension.extension:othersDeliveryIncluded
Slice NameothersDeliveryIncluded
Control0..*
54. Extension.extension:othersDeliveryIncluded.extension
Control0..0
56. Extension.extension:othersDeliveryIncluded.url
Fixed ValueothersDeliveryIncluded
58. Extension.extension:othersDeliveryIncluded.value[x]
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
60. Extension.extension:residentialType
Slice NameresidentialType
Control0..1
62. Extension.extension:residentialType.extension
Control0..0
64. Extension.extension:residentialType.url
Fixed ValueresidentialType
66. Extension.extension:residentialType.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J32-TypeHabitation-ROR/FHIR/JDV-J32-TypeHabitation-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
68. Extension.extension:specialPrice
Slice NamespecialPrice
Control0..1
70. Extension.extension:specialPrice.extension
Control0..0
72. Extension.extension:specialPrice.url
Fixed ValuespecialPrice
74. Extension.extension:specialPrice.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J39-ConditionTarifaire-ROR/FHIR/JDV-J39-ConditionTarifaire-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
76. Extension.extension:welcomeType
Slice NamewelcomeType
Control0..1
78. Extension.extension:welcomeType.extension
Control0..0
80. Extension.extension:welcomeType.url
Fixed ValuewelcomeType
82. Extension.extension:welcomeType.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J30-TemporaliteAccueil-ROR/FHIR/JDV-J30-TemporaliteAccueil-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
84. Extension.extension:mealDeliveryName
Slice NamemealDeliveryName
Control0..1
86. Extension.extension:mealDeliveryName.extension
Control0..0
88. Extension.extension:mealDeliveryName.url
Fixed ValuemealDeliveryName
90. Extension.extension:mealDeliveryName.value[x]
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
92. Extension.extension:dependencyLevel
Slice NamedependencyLevel
Control0..1
94. Extension.extension:dependencyLevel.extension
Control0..0
96. Extension.extension:dependencyLevel.url
Fixed ValuedependencyLevel
98. Extension.extension:dependencyLevel.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J27-GroupeTarifaireDependance-ROR/FHIR/JDV-J27-GroupeTarifaireDependance-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
100. Extension.extension:humanHelpPriceName
Slice NamehumanHelpPriceName
Control0..1
102. Extension.extension:humanHelpPriceName.extension
Control0..0
104. Extension.extension:humanHelpPriceName.url
Fixed ValuehumanHelpPriceName
106. Extension.extension:humanHelpPriceName.value[x]
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
108. Extension.extension:managementType
Slice NamemanagementType
Control0..1
110. Extension.extension:managementType.extension
Control0..0
112. Extension.extension:managementType.url
Fixed ValuemanagementType
114. Extension.extension:managementType.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J26-ModeGestion-ROR/FHIR/JDV-J26-ModeGestion-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
116. Extension.extension:otherAdditionalServiceName
Slice NameotherAdditionalServiceName
Control0..1
118. Extension.extension:otherAdditionalServiceName.extension
Control0..0
120. Extension.extension:otherAdditionalServiceName.url
Fixed ValueotherAdditionalServiceName
122. Extension.extension:otherAdditionalServiceName.value[x]
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
124. Extension.extension:additionalServiceName
Slice NameadditionalServiceName
Control0..1
126. Extension.extension:additionalServiceName.extension
Control0..0
128. Extension.extension:additionalServiceName.url
Fixed ValueadditionalServiceName
130. Extension.extension:additionalServiceName.value[x]
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J206-PrestationNonObligatoireIncluse-ROR/FHIR/JDV-J206-PrestationNonObligatoireIncluse-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
132. Extension.url
Fixed Valuehttps://interop.esante.gouv.fr/ig/fhir/ror/StructureDefinition/ror-organization-price
134. Extension.value[x]
Control0..0

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Extension créée dans le cadre du ROR pour permettre de définir les tarifs des prestations et services d'une entité géographique.


Optional Extension Element - found in all resources.

ShortExtensionOptional Extensions Element
Control0..*
This element is affected by the following invariants: ele-1
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control30..*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. Extension.extension:priceType
Slice NamepriceType
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control10..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Extension.extension:priceType.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
8. Extension.extension:priceType.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuepriceType
10. Extension.extension:priceType.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J36-TypeTarif-ROR/FHIR/JDV-J36-TypeTarif-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Extension.extension:priceUnit
Slice NamepriceUnit
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control10..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Extension.extension:priceUnit.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. Extension.extension:priceUnit.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuepriceUnit
18. Extension.extension:priceUnit.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J205-UnitePrix-ROR/FHIR/JDV-J205-UnitePrix-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Extension.extension:amount
Slice Nameamount
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control10..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Extension.extension:amount.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
24. Extension.extension:amount.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valueamount
26. Extension.extension:amount.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypeMoney, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Extension.extension:startDate
Slice NamestartDate
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Extension.extension:startDate.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. Extension.extension:startDate.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuestartDate
34. Extension.extension:startDate.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypedateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Extension.extension:under60
Slice Nameunder60
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Extension.extension:under60.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
40. Extension.extension:under60.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valueunder60
42. Extension.extension:under60.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Extension.extension:deliveryIncluded
Slice NamedeliveryIncluded
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Extension.extension:deliveryIncluded.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
48. Extension.extension:deliveryIncluded.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuedeliveryIncluded
50. Extension.extension:deliveryIncluded.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J206-PrestationNonObligatoireIncluse-ROR/FHIR/JDV-J206-PrestationNonObligatoireIncluse-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Extension.extension:othersDeliveryIncluded
Slice NameothersDeliveryIncluded
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. Extension.extension:othersDeliveryIncluded.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
56. Extension.extension:othersDeliveryIncluded.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueothersDeliveryIncluded
58. Extension.extension:othersDeliveryIncluded.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Extension.extension:residentialType
Slice NameresidentialType
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
62. Extension.extension:residentialType.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
64. Extension.extension:residentialType.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueresidentialType
66. Extension.extension:residentialType.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J32-TypeHabitation-ROR/FHIR/JDV-J32-TypeHabitation-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Extension.extension:specialPrice
Slice NamespecialPrice
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
70. Extension.extension:specialPrice.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
72. Extension.extension:specialPrice.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuespecialPrice
74. Extension.extension:specialPrice.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J39-ConditionTarifaire-ROR/FHIR/JDV-J39-ConditionTarifaire-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Extension.extension:welcomeType
Slice NamewelcomeType
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
78. Extension.extension:welcomeType.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
80. Extension.extension:welcomeType.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuewelcomeType
82. Extension.extension:welcomeType.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J30-TemporaliteAccueil-ROR/FHIR/JDV-J30-TemporaliteAccueil-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Extension.extension:mealDeliveryName
Slice NamemealDeliveryName
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
86. Extension.extension:mealDeliveryName.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
88. Extension.extension:mealDeliveryName.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuemealDeliveryName
90. Extension.extension:mealDeliveryName.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Extension.extension:dependencyLevel
Slice NamedependencyLevel
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
94. Extension.extension:dependencyLevel.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
96. Extension.extension:dependencyLevel.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuedependencyLevel
98. Extension.extension:dependencyLevel.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J27-GroupeTarifaireDependance-ROR/FHIR/JDV-J27-GroupeTarifaireDependance-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Extension.extension:humanHelpPriceName
Slice NamehumanHelpPriceName
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
102. Extension.extension:humanHelpPriceName.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
104. Extension.extension:humanHelpPriceName.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuehumanHelpPriceName
106. Extension.extension:humanHelpPriceName.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. Extension.extension:managementType
Slice NamemanagementType
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
110. Extension.extension:managementType.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
112. Extension.extension:managementType.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuemanagementType
114. Extension.extension:managementType.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J26-ModeGestion-ROR/FHIR/JDV-J26-ModeGestion-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Extension.extension:otherAdditionalServiceName
Slice NameotherAdditionalServiceName
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
118. Extension.extension:otherAdditionalServiceName.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
120. Extension.extension:otherAdditionalServiceName.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueotherAdditionalServiceName
122. Extension.extension:otherAdditionalServiceName.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Extension.extension:additionalServiceName
Slice NameadditionalServiceName
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control0..1*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
126. Extension.extension:additionalServiceName.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
This element is affected by the following invariants: ele-1
TypeExtension
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
128. Extension.extension:additionalServiceName.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueadditionalServiceName
130. Extension.extension:additionalServiceName.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J206-PrestationNonObligatoireIncluse-ROR/FHIR/JDV-J206-PrestationNonObligatoireIncluse-ROR
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuehttps://interop.esante.gouv.fr/ig/fhir/ror/StructureDefinition/ror-organization-price
134. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
This element is affected by the following invariants: ele-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Extension créée dans le cadre du ROR pour permettre de définir les tarifs des prestations et services d'une entité géographique.

ShortExtension
Control0..*
This element is affected by the following invariants: ele-1
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
4. Extension.extension
Definition

An Extension

ShortExtension
Control3..*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. Extension.extension:priceType
Slice NamepriceType
Definition

An Extension

ShortExtension
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Extension.extension:priceType.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
10. Extension.extension:priceType.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
12. Extension.extension:priceType.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuepriceType
14. Extension.extension:priceType.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J36-TypeTarif-ROR/FHIR/JDV-J36-TypeTarif-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.extension:priceUnit
Slice NamepriceUnit
Definition

An Extension

ShortExtension
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Extension.extension:priceUnit.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
20. Extension.extension:priceUnit.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
22. Extension.extension:priceUnit.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuepriceUnit
24. Extension.extension:priceUnit.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J205-UnitePrix-ROR/FHIR/JDV-J205-UnitePrix-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.extension:amount
Slice Nameamount
Definition

An Extension

ShortExtension
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Extension.extension:amount.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
30. Extension.extension:amount.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. Extension.extension:amount.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valueamount
34. Extension.extension:amount.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypeMoney
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Extension.extension:startDate
Slice NamestartDate
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Extension.extension:startDate.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
40. Extension.extension:startDate.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
42. Extension.extension:startDate.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuestartDate
44. Extension.extension:startDate.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Extension.extension:under60
Slice Nameunder60
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Extension.extension:under60.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
50. Extension.extension:under60.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
52. Extension.extension:under60.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valueunder60
54. Extension.extension:under60.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typeboolean
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Extension.extension:deliveryIncluded
Slice NamedeliveryIncluded
Definition

An Extension

ShortExtension
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. Extension.extension:deliveryIncluded.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
60. Extension.extension:deliveryIncluded.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
62. Extension.extension:deliveryIncluded.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuedeliveryIncluded
64. Extension.extension:deliveryIncluded.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J206-PrestationNonObligatoireIncluse-ROR/FHIR/JDV-J206-PrestationNonObligatoireIncluse-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Extension.extension:othersDeliveryIncluded
Slice NameothersDeliveryIncluded
Definition

An Extension

ShortExtension
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
68. Extension.extension:othersDeliveryIncluded.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
70. Extension.extension:othersDeliveryIncluded.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
72. Extension.extension:othersDeliveryIncluded.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueothersDeliveryIncluded
74. Extension.extension:othersDeliveryIncluded.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Extension.extension:residentialType
Slice NameresidentialType
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
78. Extension.extension:residentialType.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
80. Extension.extension:residentialType.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
82. Extension.extension:residentialType.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueresidentialType
84. Extension.extension:residentialType.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J32-TypeHabitation-ROR/FHIR/JDV-J32-TypeHabitation-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Extension.extension:specialPrice
Slice NamespecialPrice
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
88. Extension.extension:specialPrice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
90. Extension.extension:specialPrice.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
92. Extension.extension:specialPrice.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuespecialPrice
94. Extension.extension:specialPrice.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J39-ConditionTarifaire-ROR/FHIR/JDV-J39-ConditionTarifaire-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Extension.extension:welcomeType
Slice NamewelcomeType
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
98. Extension.extension:welcomeType.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
100. Extension.extension:welcomeType.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
102. Extension.extension:welcomeType.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuewelcomeType
104. Extension.extension:welcomeType.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J30-TemporaliteAccueil-ROR/FHIR/JDV-J30-TemporaliteAccueil-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Extension.extension:mealDeliveryName
Slice NamemealDeliveryName
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
108. Extension.extension:mealDeliveryName.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
110. Extension.extension:mealDeliveryName.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
112. Extension.extension:mealDeliveryName.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuemealDeliveryName
114. Extension.extension:mealDeliveryName.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Extension.extension:dependencyLevel
Slice NamedependencyLevel
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
118. Extension.extension:dependencyLevel.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
120. Extension.extension:dependencyLevel.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
122. Extension.extension:dependencyLevel.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuedependencyLevel
124. Extension.extension:dependencyLevel.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J27-GroupeTarifaireDependance-ROR/FHIR/JDV-J27-GroupeTarifaireDependance-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. Extension.extension:humanHelpPriceName
Slice NamehumanHelpPriceName
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
128. Extension.extension:humanHelpPriceName.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
130. Extension.extension:humanHelpPriceName.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
132. Extension.extension:humanHelpPriceName.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuehumanHelpPriceName
134. Extension.extension:humanHelpPriceName.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
136. Extension.extension:managementType
Slice NamemanagementType
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
138. Extension.extension:managementType.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
140. Extension.extension:managementType.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
142. Extension.extension:managementType.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValuemanagementType
144. Extension.extension:managementType.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J26-ModeGestion-ROR/FHIR/JDV-J26-ModeGestion-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
146. Extension.extension:otherAdditionalServiceName
Slice NameotherAdditionalServiceName
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
148. Extension.extension:otherAdditionalServiceName.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
150. Extension.extension:otherAdditionalServiceName.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
152. Extension.extension:otherAdditionalServiceName.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueotherAdditionalServiceName
154. Extension.extension:otherAdditionalServiceName.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
Typestring
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. Extension.extension:additionalServiceName
Slice NameadditionalServiceName
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
158. Extension.extension:additionalServiceName.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
XML FormatIn the XML format, this property is represented as an attribute.
160. Extension.extension:additionalServiceName.extension
Definition

An Extension

ShortExtension
Control0..0
This element is affected by the following invariants: ele-1
TypeExtension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
162. Extension.extension:additionalServiceName.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueadditionalServiceName
164. Extension.extension:additionalServiceName.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ele-1
BindingThe codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J206-PrestationNonObligatoireIncluse-ROR/FHIR/JDV-J206-PrestationNonObligatoireIncluse-ROR
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
166. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
XML FormatIn the XML format, this property is represented as an attribute.
Fixed Valuehttps://interop.esante.gouv.fr/ig/fhir/ror/StructureDefinition/ror-organization-price
168. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..0
This element is affected by the following invariants: ele-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))