Search FHIR

Médicosocial - Transfert de données DUI
2.0.0-ballot - public-comment France flag

This page is part of the Médicosocial - Transfert de données DUI (v2.0.0-ballot: Release) based on FHIR (HL7® FHIR® Standard) R4. This version is a pre-release. The current official version is 1.1.0. For a full list of available versions, see the Directory of published versions

Resource Profile: TDDUIEncounterSejour - Detailed Descriptions

Active as of 2025-08-01

Definitions for the tddui-encounter-sejour resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Encounter
Définition

An interaction between a patient and healthcare provider(s) for the purpose of providing healthcare service(s) or assessing the health status of a patient.

ShortAn interaction during which services are provided to the patient
Control0..*
Is Modifierfalse
Résuméfalse
Alternate NamesVisit
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Encounter.implicitRules
Définition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Commentaires

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Encounter.extension
Définition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Résuméfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Encounter.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Encounter.extension:TDDUI-plannedStartDate-r5
    Nom de la sliceTDDUI-plannedStartDate-r5
    Définition

    Cette extension implemente l'élément plannedStartDate de R5. elle permet l'ajout de la date d'entrée prévisionnelle dans le séjour

    ShortLa date/heure de début prévue (ou la date d'admission) de la rencontre | The planned start date/time (or admission date) of the encounter
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Extension Definition for Encounter.plannedStartDate for Version 5.0) (Extension Type: dateTime)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Encounter.extension:TDDUI-plannedEndDate-r5
    Nom de la sliceTDDUI-plannedEndDate-r5
    Définition

    Cette extension implemente l'élément plannedEndDate de R5. elle permet l'ajout de la date de sortie prévisionnelle du séjour

    ShortLa date/heure de fin prévue (ou la date de sortie) de la rencontre | The planned end date/time (or discharge date) of the encounter
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Extension Definition for Encounter.plannedEndDate for Version 5.0) (Extension Type: dateTime)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Encounter.extension:TDDUIAdmissionDate
    Nom de la sliceTDDUIAdmissionDate
    Définition

    Date d’admission dans la structure ESSMS.

    ShortDate d’admission dans la structure ESSMS
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Date d’admission) (Extension Type: dateTime)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Encounter.extension:TDDUIEntryModelabel
    Nom de la sliceTDDUIEntryModelabel
    Définition

    Libellé du mode d’entée du séjour.

    ShortLibellé du mode d’entée du séjour
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Libellé mode d'entrée) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Encounter.extension:TDDUIExitModeLabel
    Nom de la sliceTDDUIExitModeLabel
    Définition

    Libellé du mode de sortie du séjour.

    ShortLibellé du mode de sortie du séjour
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Libellé mode de sortie) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Encounter.extension:TDDUIComment
    Nom de la sliceTDDUIComment
    Définition

    Commentaire relatif au séjour.

    ShortCommentaire relatif au séjour
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Commentaire) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Encounter.modifierExtension
    Définition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Commentaires

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Résuméfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Encounter.identifier
    Définition

    Identifier(s) by which this encounter is known.

    ShortIdentifier(s) by which this encounter is known
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..*
    TypeIdentifier
    Is Modifierfalse
    Résumétrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Encounter.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ type
    • 22. Encounter.identifier:idStay
      Nom de la sliceidStay
      Définition

      Identifier(s) by which this encounter is known.

      ShortIdentifiant métier unique du séjourIdentifier(s) by which this encounter is known
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control10..1*
      TypeIdentifier
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Encounter.identifier:idStay.use
      Définition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Commentaires

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Encounter.identifier:idStay.type
      Définition

      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

      ShortDescription of identifier
      Commentaires

      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

      Control10..1
      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

      TypeCodeableConcept
      Is Modifierfalse
      Résumétrue
      Requirements

      Allows users to make use of identifiers when the identifier system is not known.

      Pattern Value{
        "coding" : [{
          "system" : "https://interop.esante.gouv.fr/ig/fhir/tddui/CodeSystem/tddui-encounter-identifier",
          "code" : "SEJ",
          "display" : "Identifiant du séjour"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Encounter.status
      Définition

      planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

      Shortplanned | arrived | triaged | in-progress | onleave | finished | cancelled +
      Commentaires

      Note that internal business rules will determine the appropriate transitions that may occur between statuses (and also classes).

      Control1..1
      BindingThe codes SHALL be taken from EncounterStatushttp://hl7.org/fhir/ValueSet/encounter-status|4.0.1
      (required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

      Current state of the encounter.

      Typecode
      Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Encounter.class
      Définition

      Concepts representing classification of patient encounter such as ambulatory (outpatient), inpatient, emergency, home health or others due to local variations.

      ShortClassification of patient encounter
      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from ActEncounterCodehttp://terminology.hl7.org/ValueSet/v3-ActEncounterCode
      (extensible to http://terminology.hl7.org/ValueSet/v3-ActEncounterCode)

      Classification of the encounter.

      TypeCoding
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Encounter.subject
      Définition

      The patient or group present at the encounter.

      ShortThe patient or group present at the encounter
      Commentaires

      While the encounter is always about the patient, the patient might not actually be known in all contexts of use, and there may be a group of patients that could be anonymous (such as in a group therapy for Alcoholics Anonymous - where the recording of the encounter could be used for billing on the number of people/staff and not important to the context of the specific patients) or alternately in veterinary care a herd of sheep receiving treatment (where the animals are not individually tracked).

      Control10..1
      TypeReference(TDDUI Patient, TDDUI Patient INS, Patient, Group)
      Is Modifierfalse
      Résumétrue
      Alternate Namespatient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Encounter.serviceProvider
      Définition

      The organization that is primarily responsible for this Encounter's services. This MAY be the same as the organization on the Patient record, however it could be different, such as if the actor performing the services was from an external organization (which may be billed seperately) for an external consultation. Refer to the example bundle showing an abbreviated set of Encounters for a colonoscopy.

      ShortThe organization (facility) responsible for this encounter
      Control10..1
      TypeReference(TDDUI Organization, Organization)
      Is Modifierfalse
      Résuméfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Encounter
      2. Encounter.extension
      SlicingThis element introduces a set of slices on Encounter.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. Encounter.extension:TDDUI-plannedStartDate-r5
        Nom de la sliceTDDUI-plannedStartDate-r5
        Définition

        Cette extension implemente l'élément plannedStartDate de R5. elle permet l'ajout de la date d'entrée prévisionnelle dans le séjour

        ShortLa date/heure de début prévue (ou la date d'admission) de la rencontre | The planned start date/time (or admission date) of the encounter
        Control0..1
        TypeExtension(Extension Definition for Encounter.plannedStartDate for Version 5.0) (Extension Type: dateTime)
        6. Encounter.extension:TDDUI-plannedEndDate-r5
        Nom de la sliceTDDUI-plannedEndDate-r5
        Définition

        Cette extension implemente l'élément plannedEndDate de R5. elle permet l'ajout de la date de sortie prévisionnelle du séjour

        ShortLa date/heure de fin prévue (ou la date de sortie) de la rencontre | The planned end date/time (or discharge date) of the encounter
        Control0..1
        TypeExtension(Extension Definition for Encounter.plannedEndDate for Version 5.0) (Extension Type: dateTime)
        8. Encounter.extension:TDDUIAdmissionDate
        Nom de la sliceTDDUIAdmissionDate
        ShortDate d’admission dans la structure ESSMS
        Control0..1
        TypeExtension(Date d’admission) (Extension Type: dateTime)
        10. Encounter.extension:TDDUIEntryModelabel
        Nom de la sliceTDDUIEntryModelabel
        ShortLibellé du mode d’entée du séjour
        Control0..1
        TypeExtension(Libellé mode d'entrée) (Extension Type: string)
        12. Encounter.extension:TDDUIExitModeLabel
        Nom de la sliceTDDUIExitModeLabel
        ShortLibellé du mode de sortie du séjour
        Control0..1
        TypeExtension(Libellé mode de sortie) (Extension Type: string)
        14. Encounter.extension:TDDUIComment
        Nom de la sliceTDDUIComment
        ShortCommentaire relatif au séjour
        Control0..1
        TypeExtension(Commentaire) (Extension Type: string)
        16. Encounter.identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control1..?
        SlicingThis element introduces a set of slices on Encounter.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • pattern @ type
        • 18. Encounter.identifier:idStay
          Nom de la sliceidStay
          ShortIdentifiant métier unique du séjour
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control1..1
          20. Encounter.identifier:idStay.type
          Control1..?
          Pattern Value{
            "coding" : [{
              "system" : "https://interop.esante.gouv.fr/ig/fhir/tddui/CodeSystem/tddui-encounter-identifier",
              "code" : "SEJ",
              "display" : "Identifiant du séjour"
            }]
          }
          22. Encounter.subject
          Control1..?
          TypeReference(TDDUI Patient, TDDUI Patient INS)
          24. Encounter.period
          26. Encounter.period.start
          28. Encounter.period.end
          30. Encounter.serviceProvider
          Control1..?
          TypeReference(TDDUI Organization)

          Guidance on how to interpret the contents of this table can be found here

          0. Encounter
          Définition

          An interaction between a patient and healthcare provider(s) for the purpose of providing healthcare service(s) or assessing the health status of a patient.

          ShortAn interaction during which services are provided to the patient
          Control0..*
          Is Modifierfalse
          Résuméfalse
          Alternate NamesVisit
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          2. Encounter.id
          Définition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Commentaires

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Is Modifierfalse
          Résumétrue
          4. Encounter.meta
          Définition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Résumétrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. Encounter.implicitRules
          Définition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Commentaires

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Résumétrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. Encounter.language
          Définition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Commentaires

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHOULD be taken from CommonLanguages
          (preferred to http://hl7.org/fhir/ValueSet/languages)

          A human language.

          Bindings AdditionnelsBut
          AllLanguagesBinding Max
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Résuméfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. Encounter.text
          Définition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Commentaires

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Résuméfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. Encounter.contained
          Définition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Commentaires

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

          Control0..*
          TypeResource
          Is Modifierfalse
          Résuméfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Encounter.extension
          Définition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Résuméfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Encounter.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. Encounter.extension:TDDUI-plannedStartDate-r5
            Nom de la sliceTDDUI-plannedStartDate-r5
            Définition

            Cette extension implemente l'élément plannedStartDate de R5. elle permet l'ajout de la date d'entrée prévisionnelle dans le séjour

            ShortLa date/heure de début prévue (ou la date d'admission) de la rencontre | The planned start date/time (or admission date) of the encounter
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Extension Definition for Encounter.plannedStartDate for Version 5.0) (Extension Type: dateTime)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. Encounter.extension:TDDUI-plannedEndDate-r5
            Nom de la sliceTDDUI-plannedEndDate-r5
            Définition

            Cette extension implemente l'élément plannedEndDate de R5. elle permet l'ajout de la date de sortie prévisionnelle du séjour

            ShortLa date/heure de fin prévue (ou la date de sortie) de la rencontre | The planned end date/time (or discharge date) of the encounter
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Extension Definition for Encounter.plannedEndDate for Version 5.0) (Extension Type: dateTime)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. Encounter.extension:TDDUIAdmissionDate
            Nom de la sliceTDDUIAdmissionDate
            Définition

            Date d’admission dans la structure ESSMS.

            ShortDate d’admission dans la structure ESSMS
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Date d’admission) (Extension Type: dateTime)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            22. Encounter.extension:TDDUIEntryModelabel
            Nom de la sliceTDDUIEntryModelabel
            Définition

            Libellé du mode d’entée du séjour.

            ShortLibellé du mode d’entée du séjour
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Libellé mode d'entrée) (Extension Type: string)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            24. Encounter.extension:TDDUIExitModeLabel
            Nom de la sliceTDDUIExitModeLabel
            Définition

            Libellé du mode de sortie du séjour.

            ShortLibellé du mode de sortie du séjour
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Libellé mode de sortie) (Extension Type: string)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            26. Encounter.extension:TDDUIComment
            Nom de la sliceTDDUIComment
            Définition

            Commentaire relatif au séjour.

            ShortCommentaire relatif au séjour
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Commentaire) (Extension Type: string)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. Encounter.modifierExtension
            Définition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Commentaires

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Résuméfalse
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            30. Encounter.identifier
            Définition

            Identifier(s) by which this encounter is known.

            ShortIdentifier(s) by which this encounter is known
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control1..*
            TypeIdentifier
            Is Modifierfalse
            Résumétrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Encounter.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • pattern @ type
            • 32. Encounter.identifier:idStay
              Nom de la sliceidStay
              Définition

              Identifier(s) by which this encounter is known.

              ShortIdentifiant métier unique du séjour
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control1..1
              TypeIdentifier
              Is Modifierfalse
              Résumétrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Encounter.identifier:idStay.id
              Définition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Résuméfalse
              36. Encounter.identifier:idStay.extension
              Définition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Commentaires

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Résuméfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Encounter.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 38. Encounter.identifier:idStay.use
                Définition

                The purpose of this identifier.

                Shortusual | official | temp | secondary | old (If known)
                Commentaires

                Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                Control0..1
                BindingThe codes SHALL be taken from IdentifierUse
                (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                Identifies the purpose for this identifier, if known .

                Typecode
                Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Résumétrue
                Requirements

                Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                40. Encounter.identifier:idStay.type
                Définition

                A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                ShortDescription of identifier
                Commentaires

                This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                TypeCodeableConcept
                Is Modifierfalse
                Résumétrue
                Requirements

                Allows users to make use of identifiers when the identifier system is not known.

                Pattern Value{
                  "coding" : [{
                    "system" : "https://interop.esante.gouv.fr/ig/fhir/tddui/CodeSystem/tddui-encounter-identifier",
                    "code" : "SEJ",
                    "display" : "Identifiant du séjour"
                  }]
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                42. Encounter.identifier:idStay.system
                Définition

                Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                ShortThe namespace for the identifier value
                Commentaires

                Identifier.system is always case sensitive.

                Control0..1
                Typeuri
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Résumétrue
                Requirements

                There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                Exemple<br/><b>General</b>:http://www.acme.com/identifiers/patient
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                44. Encounter.identifier:idStay.value
                Définition

                The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                ShortThe value that is unique
                Commentaires

                If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Résumétrue
                Exemple<br/><b>General</b>:123456
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                46. Encounter.identifier:idStay.period
                Définition

                Time period during which identifier is/was valid for use.

                ShortTime period when id is/was valid for use
                Control0..1
                TypePeriod
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                48. Encounter.identifier:idStay.assigner
                Définition

                Organization that issued/manages the identifier.

                ShortOrganization that issued id (may be just text)
                Commentaires

                The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                Control0..1
                TypeReference(Organization)
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                50. Encounter.status
                Définition

                planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

                Shortplanned | arrived | triaged | in-progress | onleave | finished | cancelled +
                Commentaires

                Note that internal business rules will determine the appropriate transitions that may occur between statuses (and also classes).

                Control1..1
                BindingThe codes SHALL be taken from EncounterStatus
                (required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

                Current state of the encounter.

                Typecode
                Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                52. Encounter.statusHistory
                Définition

                The status history permits the encounter resource to contain the status history without needing to read through the historical versions of the resource, or even have the server store them.

                ShortList of past encounter statuses
                Commentaires

                The current status is always found in the current version of the resource, not the status history.

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                54. Encounter.statusHistory.id
                Définition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Résuméfalse
                56. Encounter.statusHistory.extension
                Définition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Commentaires

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Résuméfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                58. Encounter.statusHistory.modifierExtension
                Définition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Commentaires

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Résumétrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                60. Encounter.statusHistory.status
                Définition

                planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

                Shortplanned | arrived | triaged | in-progress | onleave | finished | cancelled +
                Control1..1
                BindingThe codes SHALL be taken from EncounterStatus
                (required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

                Current state of the encounter.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                62. Encounter.statusHistory.period
                Définition

                The time that the episode was in the specified status.

                ShortThe time that the episode was in the specified status
                Control1..1
                TypePeriod
                Is Modifierfalse
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                64. Encounter.class
                Définition

                Concepts representing classification of patient encounter such as ambulatory (outpatient), inpatient, emergency, home health or others due to local variations.

                ShortClassification of patient encounter
                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from ActEncounterCode
                (extensible to http://terminology.hl7.org/ValueSet/v3-ActEncounterCode)

                Classification of the encounter.

                TypeCoding
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                66. Encounter.classHistory
                Définition

                The class history permits the tracking of the encounters transitions without needing to go through the resource history. This would be used for a case where an admission starts of as an emergency encounter, then transitions into an inpatient scenario. Doing this and not restarting a new encounter ensures that any lab/diagnostic results can more easily follow the patient and not require re-processing and not get lost or cancelled during a kind of discharge from emergency to inpatient.

                ShortList of past encounter classes
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                68. Encounter.classHistory.id
                Définition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Résuméfalse
                70. Encounter.classHistory.extension
                Définition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Commentaires

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Résuméfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                72. Encounter.classHistory.modifierExtension
                Définition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Commentaires

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Résumétrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                74. Encounter.classHistory.class
                Définition

                inpatient | outpatient | ambulatory | emergency +.

                Shortinpatient | outpatient | ambulatory | emergency +
                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from ActEncounterCode
                (extensible to http://terminology.hl7.org/ValueSet/v3-ActEncounterCode)

                Classification of the encounter.

                TypeCoding
                Is Modifierfalse
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                76. Encounter.classHistory.period
                Définition

                The time that the episode was in the specified class.

                ShortThe time that the episode was in the specified class
                Control1..1
                TypePeriod
                Is Modifierfalse
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                78. Encounter.type
                Définition

                Specific type of encounter (e.g. e-mail consultation, surgical day-care, skilled nursing, rehabilitation).

                ShortSpecific type of encounter
                Commentaires

                Since there are many ways to further classify encounters, this element is 0..*.

                Control0..*
                BindingFor example codes, see EncounterType
                (example to http://hl7.org/fhir/ValueSet/encounter-type)

                The type of encounter.

                TypeCodeableConcept
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                80. Encounter.serviceType
                Définition

                Broad categorization of the service that is to be provided (e.g. cardiology).

                ShortSpecific type of service
                Control0..1
                BindingFor example codes, see ServiceType
                (example to http://hl7.org/fhir/ValueSet/service-type)

                Broad categorization of the service that is to be provided.

                TypeCodeableConcept
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                82. Encounter.priority
                Définition

                Indicates the urgency of the encounter.

                ShortIndicates the urgency of the encounter
                Control0..1
                BindingFor example codes, see ActPriority
                (example to http://terminology.hl7.org/ValueSet/v3-ActPriority)

                Indicates the urgency of the encounter.

                TypeCodeableConcept
                Is Modifierfalse
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                84. Encounter.subject
                Définition

                The patient or group present at the encounter.

                ShortThe patient or group present at the encounter
                Commentaires

                While the encounter is always about the patient, the patient might not actually be known in all contexts of use, and there may be a group of patients that could be anonymous (such as in a group therapy for Alcoholics Anonymous - where the recording of the encounter could be used for billing on the number of people/staff and not important to the context of the specific patients) or alternately in veterinary care a herd of sheep receiving treatment (where the animals are not individually tracked).

                Control1..1
                TypeReference(TDDUI Patient, TDDUI Patient INS)
                Is Modifierfalse
                Résumétrue
                Alternate Namespatient
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                86. Encounter.episodeOfCare
                Définition

                Where a specific encounter should be classified as a part of a specific episode(s) of care this field should be used. This association can facilitate grouping of related encounters together for a specific purpose, such as government reporting, issue tracking, association via a common problem. The association is recorded on the encounter as these are typically created after the episode of care and grouped on entry rather than editing the episode of care to append another encounter to it (the episode of care could span years).

                ShortEpisode(s) of care that this encounter should be recorded against
                Control0..*
                TypeReference(EpisodeOfCare)
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                88. Encounter.basedOn
                Définition

                The request this encounter satisfies (e.g. incoming referral or procedure request).

                ShortThe ServiceRequest that initiated this encounter
                Control0..*
                TypeReference(ServiceRequest)
                Is Modifierfalse
                Résuméfalse
                Alternate NamesincomingReferral
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                90. Encounter.participant
                Définition

                The list of people responsible for providing the service.

                ShortList of participants involved in the encounter
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                92. Encounter.participant.id
                Définition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Résuméfalse
                94. Encounter.participant.extension
                Définition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Commentaires

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Résuméfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                96. Encounter.participant.modifierExtension
                Définition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Commentaires

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Résumétrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                98. Encounter.participant.type
                Définition

                Role of participant in encounter.

                ShortRole of participant in encounter
                Commentaires

                The participant type indicates how an individual participates in an encounter. It includes non-practitioner participants, and for practitioners this is to describe the action type in the context of this encounter (e.g. Admitting Dr, Attending Dr, Translator, Consulting Dr). This is different to the practitioner roles which are functional roles, derived from terms of employment, education, licensing, etc.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from ParticipantType
                (extensible to http://hl7.org/fhir/ValueSet/encounter-participant-type)

                Role of participant in encounter.

                TypeCodeableConcept
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                100. Encounter.participant.period
                Définition

                The period of time that the specified participant participated in the encounter. These can overlap or be sub-sets of the overall encounter's period.

                ShortPeriod of time during the encounter that the participant participated
                Control0..1
                TypePeriod
                Is Modifierfalse
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                102. Encounter.participant.individual
                Définition

                Persons involved in the encounter other than the patient.

                ShortPersons involved in the encounter other than the patient
                Control0..1
                TypeReference(Practitioner, PractitionerRole, RelatedPerson)
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                104. Encounter.appointment
                Définition

                The appointment that scheduled this encounter.

                ShortThe appointment that scheduled this encounter
                Control0..*
                TypeReference(Appointment)
                Is Modifierfalse
                Résumétrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                106. Encounter.period
                Définition

                The start and end time of the encounter.

                ShortThe start and end time of the encounter
                Commentaires

                If not (yet) known, the end of the Period may be omitted.

                Control0..1
                TypePeriod
                Is Modifierfalse
                Résuméfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                108. Encounter.period.id
                Définition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Résuméfalse
                110. Encounter.period.extension
                Définition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Commentaires

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Résuméfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Encounter.period.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 112. Encounter.period.start
                  Définition

                  The start of the period. The boundary is inclusive.

                  ShortStarting time with inclusive boundary
                  Commentaires

                  If the low element is missing, the meaning is that the low boundary is not known.

                  Control0..1
                  This element is affected by the following invariants: per-1
                  TypedateTime
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Résumétrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  114. Encounter.period.end
                  Définition

                  The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

                  ShortEnd time with inclusive boundary, if not ongoing
                  Commentaires

                  The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

                  Control0..1
                  This element is affected by the following invariants: per-1
                  TypedateTime
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Résumétrue
                  Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  116. Encounter.length
                  Définition

                  Quantity of time the encounter lasted. This excludes the time during leaves of absence.

                  ShortQuantity of time the encounter lasted (less time absent)
                  Commentaires

                  May differ from the time the Encounter.period lasted because of leave of absence.

                  Control0..1
                  TypeDuration
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  118. Encounter.reasonCode
                  Définition

                  Reason the encounter takes place, expressed as a code. For admissions, this can be used for a coded admission diagnosis.

                  ShortCoded reason the encounter takes place
                  Commentaires

                  For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

                  Control0..*
                  BindingThe codes SHOULD be taken from EncounterReasonCodes
                  (preferred to http://hl7.org/fhir/ValueSet/encounter-reason)

                  Reason why the encounter takes place.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résumétrue
                  Alternate NamesIndication, Admission diagnosis
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  120. Encounter.reasonReference
                  Définition

                  Reason the encounter takes place, expressed as a code. For admissions, this can be used for a coded admission diagnosis.

                  ShortReason the encounter takes place (reference)
                  Commentaires

                  For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

                  Control0..*
                  TypeReference(Condition, Procedure, Observation, ImmunizationRecommendation)
                  Is Modifierfalse
                  Résumétrue
                  Alternate NamesIndication, Admission diagnosis
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  122. Encounter.diagnosis
                  Définition

                  The list of diagnosis relevant to this encounter.

                  ShortThe list of diagnosis relevant to this encounter
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Résumétrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  124. Encounter.diagnosis.id
                  Définition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Résuméfalse
                  126. Encounter.diagnosis.extension
                  Définition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Commentaires

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Résuméfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  128. Encounter.diagnosis.modifierExtension
                  Définition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Commentaires

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Résumétrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  130. Encounter.diagnosis.condition
                  Définition

                  Reason the encounter takes place, as specified using information from another resource. For admissions, this is the admission diagnosis. The indication will typically be a Condition (with other resources referenced in the evidence.detail), or a Procedure.

                  ShortThe diagnosis or procedure relevant to the encounter
                  Commentaires

                  For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

                  Control1..1
                  TypeReference(Condition, Procedure)
                  Is Modifierfalse
                  Résumétrue
                  Alternate NamesAdmission diagnosis, discharge diagnosis, indication
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  132. Encounter.diagnosis.use
                  Définition

                  Role that this diagnosis has within the encounter (e.g. admission, billing, discharge …).

                  ShortRole that this diagnosis has within the encounter (e.g. admission, billing, discharge …)
                  Control0..1
                  BindingThe codes SHOULD be taken from DiagnosisRole
                  (preferred to http://hl7.org/fhir/ValueSet/diagnosis-role)

                  The type of diagnosis this condition represents.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  134. Encounter.diagnosis.rank
                  Définition

                  Ranking of the diagnosis (for each role type).

                  ShortRanking of the diagnosis (for each role type)
                  Control0..1
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  136. Encounter.account
                  Définition

                  The set of accounts that may be used for billing for this Encounter.

                  ShortThe set of accounts that may be used for billing for this Encounter
                  Commentaires

                  The billing system may choose to allocate billable items associated with the Encounter to different referenced Accounts based on internal business rules.

                  Control0..*
                  TypeReference(Account)
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  138. Encounter.hospitalization
                  Définition

                  Details about the admission to a healthcare service.

                  ShortDetails about the admission to a healthcare service
                  Commentaires

                  An Encounter may cover more than just the inpatient stay. Contexts such as outpatients, community clinics, and aged care facilities are also included.

                  The duration recorded in the period of this encounter covers the entire scope of this hospitalization record.

                  Control0..1
                  TypeBackboneElement
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  140. Encounter.hospitalization.id
                  Définition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Résuméfalse
                  142. Encounter.hospitalization.extension
                  Définition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Commentaires

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Résuméfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  144. Encounter.hospitalization.modifierExtension
                  Définition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Commentaires

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Résumétrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  146. Encounter.hospitalization.preAdmissionIdentifier
                  Définition

                  Pre-admission identifier.

                  ShortPre-admission identifier
                  Control0..1
                  TypeIdentifier
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  148. Encounter.hospitalization.origin
                  Définition

                  The location/organization from which the patient came before admission.

                  ShortThe location/organization from which the patient came before admission
                  Control0..1
                  TypeReference(Location, Organization)
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  150. Encounter.hospitalization.admitSource
                  Définition

                  From where patient was admitted (physician referral, transfer).

                  ShortFrom where patient was admitted (physician referral, transfer)
                  Control0..1
                  BindingThe codes SHOULD be taken from AdmitSource
                  (preferred to http://hl7.org/fhir/ValueSet/encounter-admit-source)

                  From where the patient was admitted.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  152. Encounter.hospitalization.reAdmission
                  Définition

                  Whether this hospitalization is a readmission and why if known.

                  ShortThe type of hospital re-admission that has occurred (if any). If the value is absent, then this is not identified as a readmission
                  Control0..1
                  BindingFor example codes, see hl7VS-re-admissionIndicator
                  (example to http://terminology.hl7.org/ValueSet/v2-0092)

                  The reason for re-admission of this hospitalization encounter.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  154. Encounter.hospitalization.dietPreference
                  Définition

                  Diet preferences reported by the patient.

                  ShortDiet preferences reported by the patient
                  Commentaires

                  For example, a patient may request both a dairy-free and nut-free diet preference (not mutually exclusive).

                  Control0..*
                  BindingFor example codes, see Diet
                  (example to http://hl7.org/fhir/ValueSet/encounter-diet)

                  Medical, cultural or ethical food preferences to help with catering requirements.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résuméfalse
                  Requirements

                  Used to track patient's diet restrictions and/or preference. For a complete description of the nutrition needs of a patient during their stay, one should use the nutritionOrder resource which links to Encounter.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  156. Encounter.hospitalization.specialCourtesy
                  Définition

                  Special courtesies (VIP, board member).

                  ShortSpecial courtesies (VIP, board member)
                  Control0..*
                  BindingThe codes SHOULD be taken from SpecialCourtesy
                  (preferred to http://hl7.org/fhir/ValueSet/encounter-special-courtesy)

                  Special courtesies.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  158. Encounter.hospitalization.specialArrangement
                  Définition

                  Any special requests that have been made for this hospitalization encounter, such as the provision of specific equipment or other things.

                  ShortWheelchair, translator, stretcher, etc.
                  Control0..*
                  BindingThe codes SHOULD be taken from SpecialArrangements
                  (preferred to http://hl7.org/fhir/ValueSet/encounter-special-arrangements)

                  Special arrangements.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  160. Encounter.hospitalization.destination
                  Définition

                  Location/organization to which the patient is discharged.

                  ShortLocation/organization to which the patient is discharged
                  Control0..1
                  TypeReference(Location, Organization)
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  162. Encounter.hospitalization.dischargeDisposition
                  Définition

                  Category or kind of location after discharge.

                  ShortCategory or kind of location after discharge
                  Control0..1
                  BindingFor example codes, see DischargeDisposition
                  (example to http://hl7.org/fhir/ValueSet/encounter-discharge-disposition)

                  Discharge Disposition.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  164. Encounter.location
                  Définition

                  List of locations where the patient has been during this encounter.

                  ShortList of locations where the patient has been
                  Commentaires

                  Virtual encounters can be recorded in the Encounter by specifying a location reference to a location of type "kind" such as "client's home" and an encounter.class = "virtual".

                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  166. Encounter.location.id
                  Définition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Résuméfalse
                  168. Encounter.location.extension
                  Définition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Commentaires

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Résuméfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  170. Encounter.location.modifierExtension
                  Définition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Commentaires

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Résumétrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  172. Encounter.location.location
                  Définition

                  The location where the encounter takes place.

                  ShortLocation the encounter takes place
                  Control1..1
                  TypeReference(Location)
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  174. Encounter.location.status
                  Définition

                  The status of the participants' presence at the specified location during the period specified. If the participant is no longer at the location, then the period will have an end date/time.

                  Shortplanned | active | reserved | completed
                  Commentaires

                  When the patient is no longer active at a location, then the period end date is entered, and the status may be changed to completed.

                  Control0..1
                  BindingThe codes SHALL be taken from EncounterLocationStatus
                  (required to http://hl7.org/fhir/ValueSet/encounter-location-status|4.0.1)

                  The status of the location.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  176. Encounter.location.physicalType
                  Définition

                  This will be used to specify the required levels (bed/ward/room/etc.) desired to be recorded to simplify either messaging or query.

                  ShortThe physical type of the location (usually the level in the location hierachy - bed room ward etc.)
                  Commentaires

                  This information is de-normalized from the Location resource to support the easier understanding of the encounter resource and processing in messaging or query.

                  There may be many levels in the hierachy, and this may only pic specific levels that are required for a specific usage scenario.

                  Control0..1
                  BindingFor example codes, see LocationType
                  (example to http://hl7.org/fhir/ValueSet/location-physical-type)

                  Physical form of the location.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  178. Encounter.location.period
                  Définition

                  Time period during which the patient was present at the location.

                  ShortTime period during which the patient was present at the location
                  Control0..1
                  TypePeriod
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  180. Encounter.serviceProvider
                  Définition

                  The organization that is primarily responsible for this Encounter's services. This MAY be the same as the organization on the Patient record, however it could be different, such as if the actor performing the services was from an external organization (which may be billed seperately) for an external consultation. Refer to the example bundle showing an abbreviated set of Encounters for a colonoscopy.

                  ShortThe organization (facility) responsible for this encounter
                  Control1..1
                  TypeReference(TDDUI Organization)
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  182. Encounter.partOf
                  Définition

                  Another Encounter of which this encounter is a part of (administratively or in time).

                  ShortAnother Encounter this encounter is part of
                  Commentaires

                  This is also used for associating a child's encounter back to the mother's encounter.

                  Refer to the Notes section in the Patient resource for further details.

                  Control0..1
                  TypeReference(Encounter)
                  Is Modifierfalse
                  Résuméfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))