Service d'Accès aux Soins
1.0.0 - trial-use France flag

This page is part of the Service d'Accès aux Soins (v1.0.0: trial-use) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: FrScheduleAgregateur - Detailed Descriptions

Active as of 2024-09-05

Definitions for the FrScheduleAgregateur resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Schedule
2. Schedule.actor
TypeReference(Device, PractitionerRole, FrRelatedPerson, FrHealthcareService, FrLocation, FrPatient, FrPractitioner)referenced, bundled

Guidance on how to interpret the contents of this table can be found here

0. Schedule
Definition

A container for slots of time that may be available for booking appointments.

ShortA container for slots of time that may be available for booking appointments
Control0..*
Alternate NamesAvailability
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
2. Schedule.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
This element is affected by the following invariants: ele-1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Schedule.extension:serviceTypeDuration
Slice NameserviceTypeDuration
Definition

Optional Extension Element - found in all resources.

ShortOptional Extensions Element
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(FrServiceTypeDuration) (Complex Extension)
Standard StatusNormative (from Trial Use)
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Schedule.extension:availabilityTime
Slice NameavailabilityTime
Definition

Optional Extension Element - found in all resources.

ShortOptional Extensions Element
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(FrScheduleAvailabiltyTime) (Complex Extension)
Standard StatusNormative (from Trial Use)
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Schedule.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Standard StatusNormative (from Trial Use)
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Schedule.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 10. Schedule.active
    Definition

    Whether this schedule record is in active use or should not be used (such as was entered in error).

    ShortWhether this schedule is in active use
    Comments

    This element is labeled as a modifier because it may be used to mark that the resource was created in error.

    Control0..1
    This element is affected by the following invariants: ele-1
    Typeboolean
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Schedule.serviceCategory
    Definition

    A broad categorization of the service that is to be performed during this appointment.

    ShortHigh-level category
    Comments

    Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

    Control0..1*
    This element is affected by the following invariants: ele-1
    BindingFor example codes, see ServiceCategoryhttp://hl7.org/fhir/ValueSet/service-category
    (example to http://hl7.org/fhir/ValueSet/service-category)
    TypeCodeableConcept
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Schedule.serviceType
    Definition

    The specific service that is to be performed during this appointment.

    ShortSpecific service
    Comments

    Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

    Control0..0*
    This element is affected by the following invariants: ele-1
    BindingFor example codes, see ServiceTypehttp://hl7.org/fhir/ValueSet/service-type
    (example to http://hl7.org/fhir/ValueSet/service-type)
    TypeCodeableConcept
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Schedule.actor
    Definition

    Slots that reference this schedule resource provide the availability details to these referenced resource(s).

    ShortResource(s) that availability information is being provided for
    Comments

    The capacity to support multiple referenced resource types should be used in cases where the specific resources themselves cannot be scheduled without the other, and thus only make sense to the system exposing them as a group. Common examples of this are where the combination of a practitioner and a room (Location) are always required by a system.

    Control1..*
    This element is affected by the following invariants: ele-1
    TypeReference(Device, PractitionerRole, FrRelatedPerson, FrHealthcareService, FrLocation, FrPatient, FrPractitioner, Patient, Practitioner, RelatedPerson, HealthcareService, Location)referenced, bundled
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
    ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))

    Guidance on how to interpret the contents of this table can be found here

    0. Schedule
    Definition

    A container for slots of time that may be available for booking appointments.

    ShortA container for slots of time that may be available for booking appointments
    Control0..*
    Alternate NamesAvailability
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    2. Schedule.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Summarytrue
    4. Schedule.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeMeta
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Schedule.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    This element is affected by the following invariants: ele-1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Schedule.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    This element is affected by the following invariants: ele-1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Schedule.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeNarrative
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Schedule.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

    Control0..*
    TypeResource
    Alternate Namesinline resources, anonymous resources, contained resources
    14. Schedule.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension
    Standard StatusNormative (from Trial Use)
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Schedule.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 16. Schedule.extension:serviceTypeDuration
      Slice NameserviceTypeDuration
      Definition

      Optional Extension Element - found in all resources.

      ShortOptional Extensions Element
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension(FrServiceTypeDuration) (Complex Extension)
      Standard StatusNormative (from Trial Use)
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Schedule.extension:availabilityTime
      Slice NameavailabilityTime
      Definition

      Optional Extension Element - found in all resources.

      ShortOptional Extensions Element
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension(FrScheduleAvailabiltyTime) (Complex Extension)
      Standard StatusNormative (from Trial Use)
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      20. Schedule.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Standard StatusNormative (from Trial Use)
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Schedule.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 22. Schedule.identifier
        Definition

        External Ids for this item.

        ShortExternal Ids for this item
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        This element is affected by the following invariants: ele-1
        TypeIdentifier
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. Schedule.identifier.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        XML FormatIn the XML format, this property is represented as an attribute.
        26. Schedule.identifier.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension
        Standard StatusNormative (from Trial Use)
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Schedule.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 28. Schedule.identifier.use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          This element is affected by the following invariants: ele-1
          BindingThe codes SHALL be taken from IdentifierUse
          (required to http://hl7.org/fhir/ValueSet/identifier-use)

          Identifies the purpose for this identifier, if known .

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          30. Schedule.identifier.type
          Definition

          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

          ShortDescription of identifier
          Comments

          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

          Control0..1
          This element is affected by the following invariants: ele-1
          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

          TypeCodeableConcept
          Summarytrue
          Requirements

          Allows users to make use of identifiers when the identifier system is not known.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          32. Schedule.identifier.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control0..1
          This element is affected by the following invariants: ele-1
          Typeuri
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. Schedule.identifier.value
          Definition

          The portion of the identifier typically relevant to the user and which is unique within the context of the system.

          ShortThe value that is unique
          Comments

          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Example<br/><b>General</b>:123456
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. Schedule.identifier.period
          Definition

          Time period during which identifier is/was valid for use.

          ShortTime period when id is/was valid for use
          Comments

          A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

          Period is not used for a duration (a measure of elapsed time). See Duration.

          Control0..1
          This element is affected by the following invariants: ele-1
          TypePeriod
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          per-1: If present, start SHALL have a lower value than end (start.hasValue().not() or end.hasValue().not() or (start <= end))
          38. Schedule.identifier.assigner
          Definition

          Organization that issued/manages the identifier.

          ShortOrganization that issued id (may be just text)
          Comments

          The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

          Control0..1
          This element is affected by the following invariants: ele-1
          TypeReference(Organization)
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
          40. Schedule.active
          Definition

          Whether this schedule record is in active use or should not be used (such as was entered in error).

          ShortWhether this schedule is in active use
          Comments

          This element is labeled as a modifier because it may be used to mark that the resource was created in error.

          Control0..1
          This element is affected by the following invariants: ele-1
          Typeboolean
          Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Schedule.serviceCategory
          Definition

          A broad categorization of the service that is to be performed during this appointment.

          ShortHigh-level category
          Comments

          Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

          Control0..1
          This element is affected by the following invariants: ele-1
          BindingFor example codes, see ServiceCategory
          (example to http://hl7.org/fhir/ValueSet/service-category)
          TypeCodeableConcept
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. Schedule.serviceType
          Definition

          The specific service that is to be performed during this appointment.

          ShortSpecific service
          Comments

          Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

          Control0..0
          This element is affected by the following invariants: ele-1
          BindingFor example codes, see ServiceType
          (example to http://hl7.org/fhir/ValueSet/service-type)
          TypeCodeableConcept
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. Schedule.specialty
          Definition

          The specialty of a practitioner that would be required to perform the service requested in this appointment.

          ShortType of specialty needed
          Comments

          Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

          Control0..*
          This element is affected by the following invariants: ele-1
          BindingThe codes SHALL be taken from fr-practitioner-specialty
          (required to http://interopsante.org/fhir/ValueSet/fr-practitioner-specialty)

          Additional details about where the content was created (e.g. clinical specialty).

          TypeCodeableConcept
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. Schedule.actor
          Definition

          Slots that reference this schedule resource provide the availability details to these referenced resource(s).

          ShortResource(s) that availability information is being provided for
          Comments

          The capacity to support multiple referenced resource types should be used in cases where the specific resources themselves cannot be scheduled without the other, and thus only make sense to the system exposing them as a group. Common examples of this are where the combination of a practitioner and a room (Location) are always required by a system.

          Control1..*
          This element is affected by the following invariants: ele-1
          TypeReference(Device, PractitionerRole, FrRelatedPerson, FrHealthcareService, FrLocation, FrPatient, FrPractitioner)referenced, bundled
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
          50. Schedule.planningHorizon
          Definition

          The period of time that the slots that reference this Schedule resource cover (even if none exist). These cover the amount of time that an organization's planning horizon; the interval for which they are currently accepting appointments. This does not define a "template" for planning outside these dates.

          ShortPeriod of time covered by schedule
          Comments

          A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

          Period is not used for a duration (a measure of elapsed time). See Duration.

          Control0..1
          This element is affected by the following invariants: ele-1
          TypePeriod
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          per-1: If present, start SHALL have a lower value than end (start.hasValue().not() or end.hasValue().not() or (start <= end))
          52. Schedule.comment
          Definition

          Comments on the availability to describe any extended information. Such as custom constraints on the slots that may be associated.

          ShortComments on availability
          Comments

          Note that FHIR strings SHALL NOT exceed 1MB in size

          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))