Service d'Accès aux Soins
1.0.0 - trial-use France flag

This page is part of the Service d'Accès aux Soins (v1.0.0: trial-use) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: BundleAgregateurCPTS - Detailed Descriptions

Active as of 2024-09-05

Definitions for the sas-cpts-bundle-aggregator resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Bundle
2. Bundle.type
Pattern Valuesearchset
4. Bundle.total
Control1..?
6. Bundle.link
Control1..1
8. Bundle.entry
Control4..?
SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • profile @ resource
  • 10. Bundle.entry:slotAgregateurCPTS
    Slice NameslotAgregateurCPTS
    Control1..*
    12. Bundle.entry:slotAgregateurCPTS.fullUrl
    Control1..?
    14. Bundle.entry:slotAgregateurCPTS.resource
    TypeSlot(FrSlotAgregateurCPTS)
    16. Bundle.entry:scheduleAgregateurCPTS
    Slice NamescheduleAgregateurCPTS
    Control1..*
    18. Bundle.entry:scheduleAgregateurCPTS.fullUrl
    Control1..?
    20. Bundle.entry:scheduleAgregateurCPTS.resource
    TypeSchedule(FrScheduleAgregateur)
    22. Bundle.entry:practitionerAgregateur
    Slice NamepractitionerAgregateur
    Control1..*
    24. Bundle.entry:practitionerAgregateur.fullUrl
    Control1..?
    26. Bundle.entry:practitionerAgregateur.resource
    TypePractitioner(FrPractitionerAgregateur)
    28. Bundle.entry:practitionerRole
    Slice NamepractitionerRole
    Control1..*
    30. Bundle.entry:practitionerRole.fullUrl
    Control1..?
    32. Bundle.entry:practitionerRole.resource
    TypePractitionerRole(FrPractitionerRoleExerciceAgregateur)
    34. Bundle.entry:healthcareserviceCPTS
    Slice NamehealthcareserviceCPTS
    Control0..*
    36. Bundle.entry:healthcareserviceCPTS.fullUrl
    Control1..?
    38. Bundle.entry:healthcareserviceCPTS.resource
    TypeHealthcareService(FrHealthcareServiceAgregateurCPTS)
    40. Bundle.entry:organizationAgregateurCPTS
    Slice NameorganizationAgregateurCPTS
    Control0..*
    42. Bundle.entry:organizationAgregateurCPTS.fullUrl
    Control1..?
    44. Bundle.entry:organizationAgregateurCPTS.resource
    TypeOrganization(FrOrganizationAgregateurCPTS)

    Guidance on how to interpret the contents of this table can be found here

    0. Bundle
    Definition

    A container for a collection of resources.

    ShortContains a collection of resources
    Control0..*
    Invariantsbdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
    bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
    bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
    bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
    bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
    bdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
    bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
    bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
    bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
    2. Bundle.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    This element is affected by the following invariants: ele-1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Bundle.type
    Definition

    Indicates the purpose of this bundle - how it is intended to be used.

    Shortdocument | message | transaction | transaction-response | batch | batch-response | history | searchset | collection
    Comments

    It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

    Control1..1
    This element is affected by the following invariants: ele-1
    BindingThe codes SHALL be taken from BundleTypehttp://hl7.org/fhir/ValueSet/bundle-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/bundle-type|4.0.1)

    Indicates the purpose of a bundle - how it is intended to be used.

    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Pattern Valuesearchset
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Bundle.total
    Definition

    If a set of search matches, this is the total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle.

    ShortIf search, the total number of matches
    Comments

    Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources.

    Control10..1
    This element is affected by the following invariants: ele-1, bdl-1
    TypeunsignedInt
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Bundle.link
    Definition

    A series of links that provide context to this bundle.

    ShortLinks related to this Bundle
    Comments

    Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS).

    Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly.

    This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific.

    Control10..1*
    This element is affected by the following invariants: ele-1
    TypeBackboneElement
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Bundle.link.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Bundle.link.relation
    Definition

    A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1.

    ShortSee http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1
    Comments

    Note that FHIR strings SHALL NOT exceed 1MB in size

    Control1..1
    This element is affected by the following invariants: ele-1
    Typestring
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Bundle.link.url
    Definition

    The reference details for the link.

    ShortReference details for the link
    Comments

    see http://en.wikipedia.org/wiki/Uniform_resource_identifier

    Control1..1
    This element is affected by the following invariants: ele-1
    Typeuri
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Bundle.entry
    Definition

    An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

    ShortEntry in the bundle - will have a resource or information
    Control40..*
    This element is affected by the following invariants: ele-1
    TypeBackboneElement
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
    bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
    SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • profile @ resource
    • 18. Bundle.entry.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      20. Bundle.entry.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-2
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Bundle.entry.search.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      24. Bundle.entry.request
      Definition

      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

      ShortAdditional execution information (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-3
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Bundle.entry.request.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      28. Bundle.entry.request.method
      Definition

      In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

      ShortGET | HEAD | POST | PUT | DELETE | PATCH
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from HTTPVerbhttp://hl7.org/fhir/ValueSet/http-verb|4.0.1
      (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

      HTTP verbs (in the HTTP command line). See HTTP rfc for details.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Bundle.entry.request.url
      Definition

      The URL for this entry, relative to the root (the address to which the request is posted).

      ShortURL for HTTP equivalent of this entry
      Comments

      E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

      Control1..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Bundle.entry.response
      Definition

      Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

      ShortResults of execution (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-4
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Bundle.entry.response.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      36. Bundle.entry.response.status
      Definition

      The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

      ShortStatus response code (text optional)
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. Bundle.entry:slotAgregateurCPTS
      Slice NameslotAgregateurCPTS
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control10..*
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      40. Bundle.entry:slotAgregateurCPTS.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      42. Bundle.entry:slotAgregateurCPTS.fullUrl
      Definition

      The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

      • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
      • Results from operations might involve resources that are not identified.
      ShortURI for resource (Absolute URL server address or URI for UUID/OID)
      Comments

      fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

      Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

      Control10..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. Bundle.entry:slotAgregateurCPTS.resource
      Definition

      A slot of time on a schedule that may be available for booking appointments.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA slot of time on a schedule that may be available for booking appointmentsA resource in the bundle
      Control0..1
      TypeSlotResource(FrSlotAgregateurCPTS)
      46. Bundle.entry:slotAgregateurCPTS.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-2
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      48. Bundle.entry:slotAgregateurCPTS.search.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      50. Bundle.entry:slotAgregateurCPTS.request
      Definition

      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

      ShortAdditional execution information (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-3
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. Bundle.entry:slotAgregateurCPTS.request.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      54. Bundle.entry:slotAgregateurCPTS.request.method
      Definition

      In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

      ShortGET | HEAD | POST | PUT | DELETE | PATCH
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from HTTPVerbhttp://hl7.org/fhir/ValueSet/http-verb|4.0.1
      (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

      HTTP verbs (in the HTTP command line). See HTTP rfc for details.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      56. Bundle.entry:slotAgregateurCPTS.request.url
      Definition

      The URL for this entry, relative to the root (the address to which the request is posted).

      ShortURL for HTTP equivalent of this entry
      Comments

      E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

      Control1..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      58. Bundle.entry:slotAgregateurCPTS.response
      Definition

      Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

      ShortResults of execution (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-4
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. Bundle.entry:slotAgregateurCPTS.response.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      62. Bundle.entry:slotAgregateurCPTS.response.status
      Definition

      The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

      ShortStatus response code (text optional)
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      64. Bundle.entry:scheduleAgregateurCPTS
      Slice NamescheduleAgregateurCPTS
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control10..*
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      66. Bundle.entry:scheduleAgregateurCPTS.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      68. Bundle.entry:scheduleAgregateurCPTS.fullUrl
      Definition

      The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

      • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
      • Results from operations might involve resources that are not identified.
      ShortURI for resource (Absolute URL server address or URI for UUID/OID)
      Comments

      fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

      Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

      Control10..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      70. Bundle.entry:scheduleAgregateurCPTS.resource
      Definition

      A container for slots of time that may be available for booking appointments.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA container for slots of time that may be available for booking appointmentsA resource in the bundle
      Control0..1
      TypeScheduleResource(FrScheduleAgregateur)
      Alternate NamesAvailability
      72. Bundle.entry:scheduleAgregateurCPTS.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-2
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      74. Bundle.entry:scheduleAgregateurCPTS.search.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      76. Bundle.entry:scheduleAgregateurCPTS.request
      Definition

      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

      ShortAdditional execution information (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-3
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      78. Bundle.entry:scheduleAgregateurCPTS.request.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      80. Bundle.entry:scheduleAgregateurCPTS.request.method
      Definition

      In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

      ShortGET | HEAD | POST | PUT | DELETE | PATCH
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from HTTPVerbhttp://hl7.org/fhir/ValueSet/http-verb|4.0.1
      (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

      HTTP verbs (in the HTTP command line). See HTTP rfc for details.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      82. Bundle.entry:scheduleAgregateurCPTS.request.url
      Definition

      The URL for this entry, relative to the root (the address to which the request is posted).

      ShortURL for HTTP equivalent of this entry
      Comments

      E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

      Control1..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      84. Bundle.entry:scheduleAgregateurCPTS.response
      Definition

      Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

      ShortResults of execution (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-4
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      86. Bundle.entry:scheduleAgregateurCPTS.response.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      88. Bundle.entry:scheduleAgregateurCPTS.response.status
      Definition

      The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

      ShortStatus response code (text optional)
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      90. Bundle.entry:practitionerAgregateur
      Slice NamepractitionerAgregateur
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control10..*
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      92. Bundle.entry:practitionerAgregateur.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      94. Bundle.entry:practitionerAgregateur.fullUrl
      Definition

      The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

      • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
      • Results from operations might involve resources that are not identified.
      ShortURI for resource (Absolute URL server address or URI for UUID/OID)
      Comments

      fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

      Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

      Control10..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      96. Bundle.entry:practitionerAgregateur.resource
      Definition

      A person who is directly or indirectly involved in the provisioning of healthcare | Un professionnel impliqué directement ou indirectement dans la prise en charge d'une personne.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA person with a formal responsibility in the provisioning of healthcare or related services | Prestataire de santéA resource in the bundle
      Control0..1
      TypePractitionerResource(FrPractitionerAgregateur)
      98. Bundle.entry:practitionerAgregateur.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-2
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      100. Bundle.entry:practitionerAgregateur.search.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      102. Bundle.entry:practitionerAgregateur.request
      Definition

      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

      ShortAdditional execution information (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-3
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      104. Bundle.entry:practitionerAgregateur.request.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      106. Bundle.entry:practitionerAgregateur.request.method
      Definition

      In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

      ShortGET | HEAD | POST | PUT | DELETE | PATCH
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from HTTPVerbhttp://hl7.org/fhir/ValueSet/http-verb|4.0.1
      (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

      HTTP verbs (in the HTTP command line). See HTTP rfc for details.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      108. Bundle.entry:practitionerAgregateur.request.url
      Definition

      The URL for this entry, relative to the root (the address to which the request is posted).

      ShortURL for HTTP equivalent of this entry
      Comments

      E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

      Control1..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      110. Bundle.entry:practitionerAgregateur.response
      Definition

      Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

      ShortResults of execution (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-4
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      112. Bundle.entry:practitionerAgregateur.response.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      114. Bundle.entry:practitionerAgregateur.response.status
      Definition

      The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

      ShortStatus response code (text optional)
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      116. Bundle.entry:practitionerRole
      Slice NamepractitionerRole
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control10..*
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      118. Bundle.entry:practitionerRole.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      120. Bundle.entry:practitionerRole.fullUrl
      Definition

      The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

      • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
      • Results from operations might involve resources that are not identified.
      ShortURI for resource (Absolute URL server address or URI for UUID/OID)
      Comments

      fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

      Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

      Control10..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      122. Bundle.entry:practitionerRole.resource
      Definition

      A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortRoles/organizations the practitioner is associated withA resource in the bundle
      Control0..1
      TypePractitionerRoleResource(FrPractitionerRoleExerciceAgregateur)
      124. Bundle.entry:practitionerRole.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-2
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      126. Bundle.entry:practitionerRole.search.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      128. Bundle.entry:practitionerRole.request
      Definition

      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

      ShortAdditional execution information (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-3
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      130. Bundle.entry:practitionerRole.request.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      132. Bundle.entry:practitionerRole.request.method
      Definition

      In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

      ShortGET | HEAD | POST | PUT | DELETE | PATCH
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from HTTPVerbhttp://hl7.org/fhir/ValueSet/http-verb|4.0.1
      (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

      HTTP verbs (in the HTTP command line). See HTTP rfc for details.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      134. Bundle.entry:practitionerRole.request.url
      Definition

      The URL for this entry, relative to the root (the address to which the request is posted).

      ShortURL for HTTP equivalent of this entry
      Comments

      E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

      Control1..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      136. Bundle.entry:practitionerRole.response
      Definition

      Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

      ShortResults of execution (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-4
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      138. Bundle.entry:practitionerRole.response.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      140. Bundle.entry:practitionerRole.response.status
      Definition

      The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

      ShortStatus response code (text optional)
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      142. Bundle.entry:healthcareserviceCPTS
      Slice NamehealthcareserviceCPTS
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      144. Bundle.entry:healthcareserviceCPTS.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      146. Bundle.entry:healthcareserviceCPTS.fullUrl
      Definition

      The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

      • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
      • Results from operations might involve resources that are not identified.
      ShortURI for resource (Absolute URL server address or URI for UUID/OID)
      Comments

      fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

      Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

      Control10..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      148. Bundle.entry:healthcareserviceCPTS.resource
      Definition

      The details of a healthcare service available at a location.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortThe details of a healthcare service available at a locationA resource in the bundle
      Control0..1
      TypeHealthcareServiceResource(FrHealthcareServiceAgregateurCPTS)
      150. Bundle.entry:healthcareserviceCPTS.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-2
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      152. Bundle.entry:healthcareserviceCPTS.search.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      154. Bundle.entry:healthcareserviceCPTS.request
      Definition

      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

      ShortAdditional execution information (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-3
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      156. Bundle.entry:healthcareserviceCPTS.request.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      158. Bundle.entry:healthcareserviceCPTS.request.method
      Definition

      In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

      ShortGET | HEAD | POST | PUT | DELETE | PATCH
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from HTTPVerbhttp://hl7.org/fhir/ValueSet/http-verb|4.0.1
      (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

      HTTP verbs (in the HTTP command line). See HTTP rfc for details.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      160. Bundle.entry:healthcareserviceCPTS.request.url
      Definition

      The URL for this entry, relative to the root (the address to which the request is posted).

      ShortURL for HTTP equivalent of this entry
      Comments

      E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

      Control1..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      162. Bundle.entry:healthcareserviceCPTS.response
      Definition

      Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

      ShortResults of execution (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-4
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      164. Bundle.entry:healthcareserviceCPTS.response.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      166. Bundle.entry:healthcareserviceCPTS.response.status
      Definition

      The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

      ShortStatus response code (text optional)
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      168. Bundle.entry:organizationAgregateurCPTS
      Slice NameorganizationAgregateurCPTS
      Definition

      An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

      ShortEntry in the bundle - will have a resource or information
      Control0..*
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
      bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
      170. Bundle.entry:organizationAgregateurCPTS.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      172. Bundle.entry:organizationAgregateurCPTS.fullUrl
      Definition

      The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

      • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
      • Results from operations might involve resources that are not identified.
      ShortURI for resource (Absolute URL server address or URI for UUID/OID)
      Comments

      fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

      Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

      Control10..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      174. Bundle.entry:organizationAgregateurCPTS.resource
      Definition

      A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc.


      The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

      ShortA grouping of people or organizations with a common purposeA resource in the bundle
      Control0..1
      TypeOrganizationResource(FrOrganizationAgregateurCPTS)
      176. Bundle.entry:organizationAgregateurCPTS.search
      Definition

      Information about the search process that lead to the creation of this entry.

      ShortSearch related information
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-2
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      178. Bundle.entry:organizationAgregateurCPTS.search.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      180. Bundle.entry:organizationAgregateurCPTS.request
      Definition

      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

      ShortAdditional execution information (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-3
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      182. Bundle.entry:organizationAgregateurCPTS.request.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      184. Bundle.entry:organizationAgregateurCPTS.request.method
      Definition

      In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

      ShortGET | HEAD | POST | PUT | DELETE | PATCH
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from HTTPVerbhttp://hl7.org/fhir/ValueSet/http-verb|4.0.1
      (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

      HTTP verbs (in the HTTP command line). See HTTP rfc for details.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      186. Bundle.entry:organizationAgregateurCPTS.request.url
      Definition

      The URL for this entry, relative to the root (the address to which the request is posted).

      ShortURL for HTTP equivalent of this entry
      Comments

      E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

      Control1..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      188. Bundle.entry:organizationAgregateurCPTS.response
      Definition

      Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

      ShortResults of execution (transaction/batch/history)
      Control0..1
      This element is affected by the following invariants: ele-1, bdl-4
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      190. Bundle.entry:organizationAgregateurCPTS.response.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      192. Bundle.entry:organizationAgregateurCPTS.response.status
      Definition

      The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

      ShortStatus response code (text optional)
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control1..1
      This element is affected by the following invariants: ele-1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Bundle
      Definition

      A container for a collection of resources.

      ShortContains a collection of resources
      Control0..*
      Invariantsbdl-7: FullUrl must be unique in a bundle, or else entries with the same fullUrl must have different meta.versionId (except in history bundles) ((type = 'history') or entry.where(fullUrl.exists()).select(fullUrl&resource.meta.versionId).isDistinct())
      bdl-9: A document must have an identifier with a system and a value (type = 'document' implies (identifier.system.exists() and identifier.value.exists()))
      bdl-3: entry.request mandatory for batch/transaction/history, otherwise prohibited (entry.all(request.exists() = (%resource.type = 'batch' or %resource.type = 'transaction' or %resource.type = 'history')))
      bdl-4: entry.response mandatory for batch-response/transaction-response/history, otherwise prohibited (entry.all(response.exists() = (%resource.type = 'batch-response' or %resource.type = 'transaction-response' or %resource.type = 'history')))
      bdl-12: A message must have a MessageHeader as the first resource (type = 'message' implies entry.first().resource.is(MessageHeader))
      bdl-1: total only when a search or history (total.empty() or (type = 'searchset') or (type = 'history'))
      bdl-2: entry.search only when a search (entry.search.empty() or (type = 'searchset'))
      bdl-11: A document must have a Composition as the first resource (type = 'document' implies entry.first().resource.is(Composition))
      bdl-10: A document must have a date (type = 'document' implies (timestamp.hasValue()))
      2. Bundle.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Summarytrue
      4. Bundle.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeMeta
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Bundle.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      This element is affected by the following invariants: ele-1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Bundle.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Bundle.identifier
      Definition

      A persistent identifier for the bundle that won't change as a bundle is copied from server to server.

      ShortPersistent identifier for the bundle
      Comments

      Persistent identity generally only matters for batches of type Document, Message, and Collection. It would not normally be populated for search and history results and servers ignore Bundle.identifier when processing batches and transactions. For Documents the .identifier SHALL be populated such that the .identifier is globally unique.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeIdentifier
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Bundle.type
      Definition

      Indicates the purpose of this bundle - how it is intended to be used.

      Shortdocument | message | transaction | transaction-response | batch | batch-response | history | searchset | collection
      Comments

      It's possible to use a bundle for other purposes (e.g. a document can be accepted as a transaction). This is primarily defined so that there can be specific rules for some of the bundle types.

      Control1..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from BundleType
      (required to http://hl7.org/fhir/ValueSet/bundle-type|4.0.1)

      Indicates the purpose of a bundle - how it is intended to be used.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Pattern Valuesearchset
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Bundle.timestamp
      Definition

      The date/time that the bundle was assembled - i.e. when the resources were placed in the bundle.

      ShortWhen the bundle was assembled
      Comments

      For many bundles, the timestamp is equal to .meta.lastUpdated, because they are not stored (e.g. search results). When a bundle is placed in a persistent store, .meta.lastUpdated will be usually be changed by the server. When the bundle is a message, a middleware agent altering the message (even if not stored) SHOULD update .meta.lastUpdated. .timestamp is used to track the original time of the Bundle, and SHOULD be populated.

      Usage:

      • document : the date the document was created. Note: the composition may predate the document, or be associated with multiple documents. The date of the composition - the authoring time - may be earlier than the document assembly time
      • message : the date that the content of the message was assembled. This date is not changed by middleware engines unless they add additional data that changes the meaning of the time of the message
      • history : the date that the history was assembled. This time would be used as the _since time to ask for subsequent updates
      • searchset : the time that the search set was assembled. Note that different pages MAY have different timestamps but need not. Having different timestamps does not imply that subsequent pages will represent or include changes made since the initial query
      • transaction | transaction-response | batch | batch-response | collection : no particular assigned meaning

      The timestamp value should be greater than the lastUpdated and other timestamps in the resources in the bundle, and it should be equal or earlier than the .meta.lastUpdated on the Bundle itself.

      Control0..1
      This element is affected by the following invariants: ele-1
      Typeinstant
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Bundle.total
      Definition

      If a set of search matches, this is the total number of entries of type 'match' across all pages in the search. It does not include search.mode = 'include' or 'outcome' entries and it does not provide a count of the number of entries in the Bundle.

      ShortIf search, the total number of matches
      Comments

      Only used if the bundle is a search result set. The total does not include resources such as OperationOutcome and included resources, only the total number of matching resources.

      Control1..1
      This element is affected by the following invariants: ele-1, bdl-1
      TypeunsignedInt
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Bundle.link
      Definition

      A series of links that provide context to this bundle.

      ShortLinks related to this Bundle
      Comments

      Both Bundle.link and Bundle.entry.link are defined to support providing additional context when Bundles are used (e.g. HATEOAS).

      Bundle.entry.link corresponds to links found in the HTTP header if the resource in the entry was read directly.

      This specification defines some specific uses of Bundle.link for searching and paging, but no specific uses for Bundle.entry.link, and no defined function in a transaction - the meaning is implementation specific.

      Control1..1
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Bundle.link.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      XML FormatIn the XML format, this property is represented as an attribute.
      22. Bundle.link.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Standard StatusNormative (from Normative)
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Bundle.link.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 24. Bundle.link.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. Bundle.link.relation
        Definition

        A name which details the functional use for this link - see http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1.

        ShortSee http://www.iana.org/assignments/link-relations/link-relations.xhtml#link-relations-1
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control1..1
        This element is affected by the following invariants: ele-1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Bundle.link.url
        Definition

        The reference details for the link.

        ShortReference details for the link
        Comments

        see http://en.wikipedia.org/wiki/Uniform_resource_identifier

        Control1..1
        This element is affected by the following invariants: ele-1
        Typeuri
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Bundle.entry
        Definition

        An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

        ShortEntry in the bundle - will have a resource or information
        Control4..*
        This element is affected by the following invariants: ele-1
        TypeBackboneElement
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
        bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
        SlicingThis element introduces a set of slices on Bundle.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • profile @ resource
        • 32. Bundle.entry.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          XML FormatIn the XML format, this property is represented as an attribute.
          34. Bundle.entry.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension
          Standard StatusNormative (from Normative)
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Bundle.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 36. Bundle.entry.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            38. Bundle.entry.link
            Definition

            A series of links that provide context to this entry.

            ShortLinks related to this entry
            Control0..*
            TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
            Summarytrue
            40. Bundle.entry.fullUrl
            Definition

            The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

            • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
            • Results from operations might involve resources that are not identified.
            ShortURI for resource (Absolute URL server address or URI for UUID/OID)
            Comments

            fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

            Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

            Control0..1
            This element is affected by the following invariants: ele-1
            Typeuri
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. Bundle.entry.resource
            Definition

            The Resource for the entry. The purpose/meaning of the resource is determined by the Bundle.type.

            ShortA resource in the bundle
            Control0..1
            TypeResource
            Summarytrue
            44. Bundle.entry.search
            Definition

            Information about the search process that lead to the creation of this entry.

            ShortSearch related information
            Control0..1
            This element is affected by the following invariants: ele-1, bdl-2
            TypeBackboneElement
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. Bundle.entry.search.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            XML FormatIn the XML format, this property is represented as an attribute.
            48. Bundle.entry.search.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension
            Standard StatusNormative (from Normative)
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Bundle.entry.search.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 50. Bundle.entry.search.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              This element is affected by the following invariants: ele-1
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              52. Bundle.entry.search.mode
              Definition

              Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

              Shortmatch | include | outcome - why this is in the result set
              Comments

              There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

              Control0..1
              This element is affected by the following invariants: ele-1
              BindingThe codes SHALL be taken from SearchEntryMode
              (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

              Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

              Typecode
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Bundle.entry.search.score
              Definition

              When searching, the server's search ranking score for the entry.

              ShortSearch ranking (between 0 and 1)
              Comments

              Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

              See Patient Match for the EMPI search which relates to this element.

              Control0..1
              This element is affected by the following invariants: ele-1
              Typedecimal
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Bundle.entry.request
              Definition

              Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

              ShortAdditional execution information (transaction/batch/history)
              Control0..1
              This element is affected by the following invariants: ele-1, bdl-3
              TypeBackboneElement
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. Bundle.entry.request.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              XML FormatIn the XML format, this property is represented as an attribute.
              60. Bundle.entry.request.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              This element is affected by the following invariants: ele-1
              TypeExtension
              Standard StatusNormative (from Normative)
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Bundle.entry.request.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 62. Bundle.entry.request.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                64. Bundle.entry.request.method
                Definition

                In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

                ShortGET | HEAD | POST | PUT | DELETE | PATCH
                Comments

                Note that FHIR strings SHALL NOT exceed 1MB in size

                Control1..1
                This element is affected by the following invariants: ele-1
                BindingThe codes SHALL be taken from HTTPVerb
                (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

                HTTP verbs (in the HTTP command line). See HTTP rfc for details.

                Typecode
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                66. Bundle.entry.request.url
                Definition

                The URL for this entry, relative to the root (the address to which the request is posted).

                ShortURL for HTTP equivalent of this entry
                Comments

                E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

                Control1..1
                This element is affected by the following invariants: ele-1
                Typeuri
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                68. Bundle.entry.request.ifNoneMatch
                Definition

                If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

                ShortFor managing cache currency
                Comments

                Note that FHIR strings SHALL NOT exceed 1MB in size

                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                70. Bundle.entry.request.ifModifiedSince
                Definition

                Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

                ShortFor managing cache currency
                Comments

                Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

                Control0..1
                This element is affected by the following invariants: ele-1
                Typeinstant
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                72. Bundle.entry.request.ifMatch
                Definition

                Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

                ShortFor managing update contention
                Comments

                Note that FHIR strings SHALL NOT exceed 1MB in size

                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                74. Bundle.entry.request.ifNoneExist
                Definition

                Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

                ShortFor conditional creates
                Comments

                Note that FHIR strings SHALL NOT exceed 1MB in size

                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                76. Bundle.entry.response
                Definition

                Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

                ShortResults of execution (transaction/batch/history)
                Control0..1
                This element is affected by the following invariants: ele-1, bdl-4
                TypeBackboneElement
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                78. Bundle.entry.response.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                XML FormatIn the XML format, this property is represented as an attribute.
                80. Bundle.entry.response.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension
                Standard StatusNormative (from Normative)
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Bundle.entry.response.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 82. Bundle.entry.response.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  This element is affected by the following invariants: ele-1
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  84. Bundle.entry.response.status
                  Definition

                  The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

                  ShortStatus response code (text optional)
                  Comments

                  Note that FHIR strings SHALL NOT exceed 1MB in size

                  Control1..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  86. Bundle.entry.response.location
                  Definition

                  The location header created by processing this operation, populated if the operation returns a location.

                  ShortThe location (if the operation returns a location)
                  Comments

                  see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typeuri
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  88. Bundle.entry.response.etag
                  Definition

                  The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

                  ShortThe Etag for the resource (if relevant)
                  Comments

                  Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typestring
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  90. Bundle.entry.response.lastModified
                  Definition

                  The date/time that the resource was modified on the server.

                  ShortServer's date time modified
                  Comments

                  This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typeinstant
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  92. Bundle.entry.response.outcome
                  Definition

                  An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

                  ShortOperationOutcome with hints and warnings (for batch/transaction)
                  Comments

                  For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

                  This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

                  Control0..1
                  TypeResource
                  Summarytrue
                  94. Bundle.entry:slotAgregateurCPTS
                  Slice NameslotAgregateurCPTS
                  Definition

                  An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

                  ShortEntry in the bundle - will have a resource or information
                  Control1..*
                  This element is affected by the following invariants: ele-1
                  TypeBackboneElement
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
                  bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
                  96. Bundle.entry:slotAgregateurCPTS.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  XML FormatIn the XML format, this property is represented as an attribute.
                  98. Bundle.entry:slotAgregateurCPTS.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  This element is affected by the following invariants: ele-1
                  TypeExtension
                  Standard StatusNormative (from Normative)
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Bundle.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 100. Bundle.entry:slotAgregateurCPTS.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    102. Bundle.entry:slotAgregateurCPTS.link
                    Definition

                    A series of links that provide context to this entry.

                    ShortLinks related to this entry
                    Control0..*
                    TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
                    Summarytrue
                    104. Bundle.entry:slotAgregateurCPTS.fullUrl
                    Definition

                    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

                    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
                    • Results from operations might involve resources that are not identified.
                    ShortURI for resource (Absolute URL server address or URI for UUID/OID)
                    Comments

                    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

                    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

                    Control1..1
                    This element is affected by the following invariants: ele-1
                    Typeuri
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    106. Bundle.entry:slotAgregateurCPTS.resource
                    Definition

                    A slot of time on a schedule that may be available for booking appointments.

                    ShortA slot of time on a schedule that may be available for booking appointments
                    Control0..1
                    TypeSlot(FrSlotAgregateurCPTS)
                    108. Bundle.entry:slotAgregateurCPTS.search
                    Definition

                    Information about the search process that lead to the creation of this entry.

                    ShortSearch related information
                    Control0..1
                    This element is affected by the following invariants: ele-1, bdl-2
                    TypeBackboneElement
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    110. Bundle.entry:slotAgregateurCPTS.search.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    XML FormatIn the XML format, this property is represented as an attribute.
                    112. Bundle.entry:slotAgregateurCPTS.search.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    TypeExtension
                    Standard StatusNormative (from Normative)
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Bundle.entry.search.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 114. Bundle.entry:slotAgregateurCPTS.search.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      This element is affected by the following invariants: ele-1
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      116. Bundle.entry:slotAgregateurCPTS.search.mode
                      Definition

                      Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                      Shortmatch | include | outcome - why this is in the result set
                      Comments

                      There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

                      Control0..1
                      This element is affected by the following invariants: ele-1
                      BindingThe codes SHALL be taken from SearchEntryMode
                      (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

                      Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                      Typecode
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      118. Bundle.entry:slotAgregateurCPTS.search.score
                      Definition

                      When searching, the server's search ranking score for the entry.

                      ShortSearch ranking (between 0 and 1)
                      Comments

                      Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

                      See Patient Match for the EMPI search which relates to this element.

                      Control0..1
                      This element is affected by the following invariants: ele-1
                      Typedecimal
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      120. Bundle.entry:slotAgregateurCPTS.request
                      Definition

                      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

                      ShortAdditional execution information (transaction/batch/history)
                      Control0..1
                      This element is affected by the following invariants: ele-1, bdl-3
                      TypeBackboneElement
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      122. Bundle.entry:slotAgregateurCPTS.request.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      XML FormatIn the XML format, this property is represented as an attribute.
                      124. Bundle.entry:slotAgregateurCPTS.request.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      This element is affected by the following invariants: ele-1
                      TypeExtension
                      Standard StatusNormative (from Normative)
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Bundle.entry.request.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 126. Bundle.entry:slotAgregateurCPTS.request.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        128. Bundle.entry:slotAgregateurCPTS.request.method
                        Definition

                        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

                        ShortGET | HEAD | POST | PUT | DELETE | PATCH
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control1..1
                        This element is affected by the following invariants: ele-1
                        BindingThe codes SHALL be taken from HTTPVerb
                        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

                        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

                        Typecode
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        130. Bundle.entry:slotAgregateurCPTS.request.url
                        Definition

                        The URL for this entry, relative to the root (the address to which the request is posted).

                        ShortURL for HTTP equivalent of this entry
                        Comments

                        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

                        Control1..1
                        This element is affected by the following invariants: ele-1
                        Typeuri
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        132. Bundle.entry:slotAgregateurCPTS.request.ifNoneMatch
                        Definition

                        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

                        ShortFor managing cache currency
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        134. Bundle.entry:slotAgregateurCPTS.request.ifModifiedSince
                        Definition

                        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

                        ShortFor managing cache currency
                        Comments

                        Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typeinstant
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        136. Bundle.entry:slotAgregateurCPTS.request.ifMatch
                        Definition

                        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

                        ShortFor managing update contention
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        138. Bundle.entry:slotAgregateurCPTS.request.ifNoneExist
                        Definition

                        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

                        ShortFor conditional creates
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        140. Bundle.entry:slotAgregateurCPTS.response
                        Definition

                        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

                        ShortResults of execution (transaction/batch/history)
                        Control0..1
                        This element is affected by the following invariants: ele-1, bdl-4
                        TypeBackboneElement
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        142. Bundle.entry:slotAgregateurCPTS.response.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        XML FormatIn the XML format, this property is represented as an attribute.
                        144. Bundle.entry:slotAgregateurCPTS.response.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeExtension
                        Standard StatusNormative (from Normative)
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Bundle.entry.response.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 146. Bundle.entry:slotAgregateurCPTS.response.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          This element is affected by the following invariants: ele-1
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          148. Bundle.entry:slotAgregateurCPTS.response.status
                          Definition

                          The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

                          ShortStatus response code (text optional)
                          Comments

                          Note that FHIR strings SHALL NOT exceed 1MB in size

                          Control1..1
                          This element is affected by the following invariants: ele-1
                          Typestring
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          150. Bundle.entry:slotAgregateurCPTS.response.location
                          Definition

                          The location header created by processing this operation, populated if the operation returns a location.

                          ShortThe location (if the operation returns a location)
                          Comments

                          see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typeuri
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          152. Bundle.entry:slotAgregateurCPTS.response.etag
                          Definition

                          The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

                          ShortThe Etag for the resource (if relevant)
                          Comments

                          Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typestring
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          154. Bundle.entry:slotAgregateurCPTS.response.lastModified
                          Definition

                          The date/time that the resource was modified on the server.

                          ShortServer's date time modified
                          Comments

                          This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typeinstant
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          156. Bundle.entry:slotAgregateurCPTS.response.outcome
                          Definition

                          An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

                          ShortOperationOutcome with hints and warnings (for batch/transaction)
                          Comments

                          For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

                          This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

                          Control0..1
                          TypeResource
                          Summarytrue
                          158. Bundle.entry:scheduleAgregateurCPTS
                          Slice NamescheduleAgregateurCPTS
                          Definition

                          An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

                          ShortEntry in the bundle - will have a resource or information
                          Control1..*
                          This element is affected by the following invariants: ele-1
                          TypeBackboneElement
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
                          bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
                          160. Bundle.entry:scheduleAgregateurCPTS.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          XML FormatIn the XML format, this property is represented as an attribute.
                          162. Bundle.entry:scheduleAgregateurCPTS.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          This element is affected by the following invariants: ele-1
                          TypeExtension
                          Standard StatusNormative (from Normative)
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Bundle.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 164. Bundle.entry:scheduleAgregateurCPTS.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            This element is affected by the following invariants: ele-1
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            166. Bundle.entry:scheduleAgregateurCPTS.link
                            Definition

                            A series of links that provide context to this entry.

                            ShortLinks related to this entry
                            Control0..*
                            TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
                            Summarytrue
                            168. Bundle.entry:scheduleAgregateurCPTS.fullUrl
                            Definition

                            The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

                            • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
                            • Results from operations might involve resources that are not identified.
                            ShortURI for resource (Absolute URL server address or URI for UUID/OID)
                            Comments

                            fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

                            Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

                            Control1..1
                            This element is affected by the following invariants: ele-1
                            Typeuri
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            170. Bundle.entry:scheduleAgregateurCPTS.resource
                            Definition

                            A container for slots of time that may be available for booking appointments.

                            ShortA container for slots of time that may be available for booking appointments
                            Control0..1
                            TypeSchedule(FrScheduleAgregateur)
                            Alternate NamesAvailability
                            172. Bundle.entry:scheduleAgregateurCPTS.search
                            Definition

                            Information about the search process that lead to the creation of this entry.

                            ShortSearch related information
                            Control0..1
                            This element is affected by the following invariants: ele-1, bdl-2
                            TypeBackboneElement
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            174. Bundle.entry:scheduleAgregateurCPTS.search.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            XML FormatIn the XML format, this property is represented as an attribute.
                            176. Bundle.entry:scheduleAgregateurCPTS.search.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            This element is affected by the following invariants: ele-1
                            TypeExtension
                            Standard StatusNormative (from Normative)
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Bundle.entry.search.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 178. Bundle.entry:scheduleAgregateurCPTS.search.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored even if unrecognized
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              This element is affected by the following invariants: ele-1
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                              Summarytrue
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content, modifiers
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              180. Bundle.entry:scheduleAgregateurCPTS.search.mode
                              Definition

                              Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                              Shortmatch | include | outcome - why this is in the result set
                              Comments

                              There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

                              Control0..1
                              This element is affected by the following invariants: ele-1
                              BindingThe codes SHALL be taken from SearchEntryMode
                              (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

                              Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                              Typecode
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              182. Bundle.entry:scheduleAgregateurCPTS.search.score
                              Definition

                              When searching, the server's search ranking score for the entry.

                              ShortSearch ranking (between 0 and 1)
                              Comments

                              Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

                              See Patient Match for the EMPI search which relates to this element.

                              Control0..1
                              This element is affected by the following invariants: ele-1
                              Typedecimal
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              184. Bundle.entry:scheduleAgregateurCPTS.request
                              Definition

                              Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

                              ShortAdditional execution information (transaction/batch/history)
                              Control0..1
                              This element is affected by the following invariants: ele-1, bdl-3
                              TypeBackboneElement
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              186. Bundle.entry:scheduleAgregateurCPTS.request.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              XML FormatIn the XML format, this property is represented as an attribute.
                              188. Bundle.entry:scheduleAgregateurCPTS.request.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              This element is affected by the following invariants: ele-1
                              TypeExtension
                              Standard StatusNormative (from Normative)
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Bundle.entry.request.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 190. Bundle.entry:scheduleAgregateurCPTS.request.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                This element is affected by the following invariants: ele-1
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                192. Bundle.entry:scheduleAgregateurCPTS.request.method
                                Definition

                                In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

                                ShortGET | HEAD | POST | PUT | DELETE | PATCH
                                Comments

                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                Control1..1
                                This element is affected by the following invariants: ele-1
                                BindingThe codes SHALL be taken from HTTPVerb
                                (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

                                HTTP verbs (in the HTTP command line). See HTTP rfc for details.

                                Typecode
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                194. Bundle.entry:scheduleAgregateurCPTS.request.url
                                Definition

                                The URL for this entry, relative to the root (the address to which the request is posted).

                                ShortURL for HTTP equivalent of this entry
                                Comments

                                E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

                                Control1..1
                                This element is affected by the following invariants: ele-1
                                Typeuri
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                196. Bundle.entry:scheduleAgregateurCPTS.request.ifNoneMatch
                                Definition

                                If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

                                ShortFor managing cache currency
                                Comments

                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                198. Bundle.entry:scheduleAgregateurCPTS.request.ifModifiedSince
                                Definition

                                Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

                                ShortFor managing cache currency
                                Comments

                                Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typeinstant
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                200. Bundle.entry:scheduleAgregateurCPTS.request.ifMatch
                                Definition

                                Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

                                ShortFor managing update contention
                                Comments

                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                202. Bundle.entry:scheduleAgregateurCPTS.request.ifNoneExist
                                Definition

                                Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

                                ShortFor conditional creates
                                Comments

                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typestring
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                204. Bundle.entry:scheduleAgregateurCPTS.response
                                Definition

                                Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

                                ShortResults of execution (transaction/batch/history)
                                Control0..1
                                This element is affected by the following invariants: ele-1, bdl-4
                                TypeBackboneElement
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                206. Bundle.entry:scheduleAgregateurCPTS.response.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                XML FormatIn the XML format, this property is represented as an attribute.
                                208. Bundle.entry:scheduleAgregateurCPTS.response.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                This element is affected by the following invariants: ele-1
                                TypeExtension
                                Standard StatusNormative (from Normative)
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Bundle.entry.response.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 210. Bundle.entry:scheduleAgregateurCPTS.response.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  This element is affected by the following invariants: ele-1
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  212. Bundle.entry:scheduleAgregateurCPTS.response.status
                                  Definition

                                  The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

                                  ShortStatus response code (text optional)
                                  Comments

                                  Note that FHIR strings SHALL NOT exceed 1MB in size

                                  Control1..1
                                  This element is affected by the following invariants: ele-1
                                  Typestring
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  214. Bundle.entry:scheduleAgregateurCPTS.response.location
                                  Definition

                                  The location header created by processing this operation, populated if the operation returns a location.

                                  ShortThe location (if the operation returns a location)
                                  Comments

                                  see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  Typeuri
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  216. Bundle.entry:scheduleAgregateurCPTS.response.etag
                                  Definition

                                  The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

                                  ShortThe Etag for the resource (if relevant)
                                  Comments

                                  Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  Typestring
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  218. Bundle.entry:scheduleAgregateurCPTS.response.lastModified
                                  Definition

                                  The date/time that the resource was modified on the server.

                                  ShortServer's date time modified
                                  Comments

                                  This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  Typeinstant
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  220. Bundle.entry:scheduleAgregateurCPTS.response.outcome
                                  Definition

                                  An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

                                  ShortOperationOutcome with hints and warnings (for batch/transaction)
                                  Comments

                                  For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

                                  This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

                                  Control0..1
                                  TypeResource
                                  Summarytrue
                                  222. Bundle.entry:practitionerAgregateur
                                  Slice NamepractitionerAgregateur
                                  Definition

                                  An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

                                  ShortEntry in the bundle - will have a resource or information
                                  Control1..*
                                  This element is affected by the following invariants: ele-1
                                  TypeBackboneElement
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
                                  bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
                                  224. Bundle.entry:practitionerAgregateur.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  Typestring
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  226. Bundle.entry:practitionerAgregateur.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  This element is affected by the following invariants: ele-1
                                  TypeExtension
                                  Standard StatusNormative (from Normative)
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Bundle.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 228. Bundle.entry:practitionerAgregateur.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    This element is affected by the following invariants: ele-1
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    230. Bundle.entry:practitionerAgregateur.link
                                    Definition

                                    A series of links that provide context to this entry.

                                    ShortLinks related to this entry
                                    Control0..*
                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
                                    Summarytrue
                                    232. Bundle.entry:practitionerAgregateur.fullUrl
                                    Definition

                                    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

                                    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
                                    • Results from operations might involve resources that are not identified.
                                    ShortURI for resource (Absolute URL server address or URI for UUID/OID)
                                    Comments

                                    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

                                    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

                                    Control1..1
                                    This element is affected by the following invariants: ele-1
                                    Typeuri
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    234. Bundle.entry:practitionerAgregateur.resource
                                    Definition

                                    A person who is directly or indirectly involved in the provisioning of healthcare | Un professionnel impliqué directement ou indirectement dans la prise en charge d'une personne.

                                    ShortA person with a formal responsibility in the provisioning of healthcare or related services | Prestataire de santé
                                    Control0..1
                                    TypePractitioner(FrPractitionerAgregateur)
                                    236. Bundle.entry:practitionerAgregateur.search
                                    Definition

                                    Information about the search process that lead to the creation of this entry.

                                    ShortSearch related information
                                    Control0..1
                                    This element is affected by the following invariants: ele-1, bdl-2
                                    TypeBackboneElement
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    238. Bundle.entry:practitionerAgregateur.search.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    240. Bundle.entry:practitionerAgregateur.search.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    This element is affected by the following invariants: ele-1
                                    TypeExtension
                                    Standard StatusNormative (from Normative)
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    SlicingThis element introduces a set of slices on Bundle.entry.search.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ url
                                    • 242. Bundle.entry:practitionerAgregateur.search.modifierExtension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                      ShortExtensions that cannot be ignored even if unrecognized
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      This element is affected by the following invariants: ele-1
                                      TypeExtension
                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                      Summarytrue
                                      Requirements

                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                      Alternate Namesextensions, user content, modifiers
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      244. Bundle.entry:practitionerAgregateur.search.mode
                                      Definition

                                      Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                                      Shortmatch | include | outcome - why this is in the result set
                                      Comments

                                      There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

                                      Control0..1
                                      This element is affected by the following invariants: ele-1
                                      BindingThe codes SHALL be taken from SearchEntryMode
                                      (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

                                      Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                                      Typecode
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      246. Bundle.entry:practitionerAgregateur.search.score
                                      Definition

                                      When searching, the server's search ranking score for the entry.

                                      ShortSearch ranking (between 0 and 1)
                                      Comments

                                      Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

                                      See Patient Match for the EMPI search which relates to this element.

                                      Control0..1
                                      This element is affected by the following invariants: ele-1
                                      Typedecimal
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      248. Bundle.entry:practitionerAgregateur.request
                                      Definition

                                      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

                                      ShortAdditional execution information (transaction/batch/history)
                                      Control0..1
                                      This element is affected by the following invariants: ele-1, bdl-3
                                      TypeBackboneElement
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      250. Bundle.entry:practitionerAgregateur.request.id
                                      Definition

                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                      ShortUnique id for inter-element referencing
                                      Control0..1
                                      Typestring
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      252. Bundle.entry:practitionerAgregateur.request.extension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                      ShortAdditional content defined by implementations
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      This element is affected by the following invariants: ele-1
                                      TypeExtension
                                      Standard StatusNormative (from Normative)
                                      Alternate Namesextensions, user content
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      SlicingThis element introduces a set of slices on Bundle.entry.request.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                      • value @ url
                                      • 254. Bundle.entry:practitionerAgregateur.request.modifierExtension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                        ShortExtensions that cannot be ignored even if unrecognized
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        This element is affected by the following invariants: ele-1
                                        TypeExtension
                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                        Summarytrue
                                        Requirements

                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                        Alternate Namesextensions, user content, modifiers
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        256. Bundle.entry:practitionerAgregateur.request.method
                                        Definition

                                        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

                                        ShortGET | HEAD | POST | PUT | DELETE | PATCH
                                        Comments

                                        Note that FHIR strings SHALL NOT exceed 1MB in size

                                        Control1..1
                                        This element is affected by the following invariants: ele-1
                                        BindingThe codes SHALL be taken from HTTPVerb
                                        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

                                        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

                                        Typecode
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        258. Bundle.entry:practitionerAgregateur.request.url
                                        Definition

                                        The URL for this entry, relative to the root (the address to which the request is posted).

                                        ShortURL for HTTP equivalent of this entry
                                        Comments

                                        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

                                        Control1..1
                                        This element is affected by the following invariants: ele-1
                                        Typeuri
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        260. Bundle.entry:practitionerAgregateur.request.ifNoneMatch
                                        Definition

                                        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

                                        ShortFor managing cache currency
                                        Comments

                                        Note that FHIR strings SHALL NOT exceed 1MB in size

                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typestring
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        262. Bundle.entry:practitionerAgregateur.request.ifModifiedSince
                                        Definition

                                        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

                                        ShortFor managing cache currency
                                        Comments

                                        Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typeinstant
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        264. Bundle.entry:practitionerAgregateur.request.ifMatch
                                        Definition

                                        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

                                        ShortFor managing update contention
                                        Comments

                                        Note that FHIR strings SHALL NOT exceed 1MB in size

                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typestring
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        266. Bundle.entry:practitionerAgregateur.request.ifNoneExist
                                        Definition

                                        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

                                        ShortFor conditional creates
                                        Comments

                                        Note that FHIR strings SHALL NOT exceed 1MB in size

                                        Control0..1
                                        This element is affected by the following invariants: ele-1
                                        Typestring
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        268. Bundle.entry:practitionerAgregateur.response
                                        Definition

                                        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

                                        ShortResults of execution (transaction/batch/history)
                                        Control0..1
                                        This element is affected by the following invariants: ele-1, bdl-4
                                        TypeBackboneElement
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        270. Bundle.entry:practitionerAgregateur.response.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        Typestring
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        272. Bundle.entry:practitionerAgregateur.response.extension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                        ShortAdditional content defined by implementations
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        This element is affected by the following invariants: ele-1
                                        TypeExtension
                                        Standard StatusNormative (from Normative)
                                        Alternate Namesextensions, user content
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        SlicingThis element introduces a set of slices on Bundle.entry.response.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ url
                                        • 274. Bundle.entry:practitionerAgregateur.response.modifierExtension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                          ShortExtensions that cannot be ignored even if unrecognized
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          This element is affected by the following invariants: ele-1
                                          TypeExtension
                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                          Summarytrue
                                          Requirements

                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                          Alternate Namesextensions, user content, modifiers
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          276. Bundle.entry:practitionerAgregateur.response.status
                                          Definition

                                          The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

                                          ShortStatus response code (text optional)
                                          Comments

                                          Note that FHIR strings SHALL NOT exceed 1MB in size

                                          Control1..1
                                          This element is affected by the following invariants: ele-1
                                          Typestring
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          278. Bundle.entry:practitionerAgregateur.response.location
                                          Definition

                                          The location header created by processing this operation, populated if the operation returns a location.

                                          ShortThe location (if the operation returns a location)
                                          Comments

                                          see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                                          Control0..1
                                          This element is affected by the following invariants: ele-1
                                          Typeuri
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          280. Bundle.entry:practitionerAgregateur.response.etag
                                          Definition

                                          The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

                                          ShortThe Etag for the resource (if relevant)
                                          Comments

                                          Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

                                          Control0..1
                                          This element is affected by the following invariants: ele-1
                                          Typestring
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          282. Bundle.entry:practitionerAgregateur.response.lastModified
                                          Definition

                                          The date/time that the resource was modified on the server.

                                          ShortServer's date time modified
                                          Comments

                                          This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

                                          Control0..1
                                          This element is affected by the following invariants: ele-1
                                          Typeinstant
                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          284. Bundle.entry:practitionerAgregateur.response.outcome
                                          Definition

                                          An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

                                          ShortOperationOutcome with hints and warnings (for batch/transaction)
                                          Comments

                                          For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

                                          This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

                                          Control0..1
                                          TypeResource
                                          Summarytrue
                                          286. Bundle.entry:practitionerRole
                                          Slice NamepractitionerRole
                                          Definition

                                          An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

                                          ShortEntry in the bundle - will have a resource or information
                                          Control1..*
                                          This element is affected by the following invariants: ele-1
                                          TypeBackboneElement
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
                                          bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
                                          288. Bundle.entry:practitionerRole.id
                                          Definition

                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                          ShortUnique id for inter-element referencing
                                          Control0..1
                                          Typestring
                                          XML FormatIn the XML format, this property is represented as an attribute.
                                          290. Bundle.entry:practitionerRole.extension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                          ShortAdditional content defined by implementations
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          This element is affected by the following invariants: ele-1
                                          TypeExtension
                                          Standard StatusNormative (from Normative)
                                          Alternate Namesextensions, user content
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          SlicingThis element introduces a set of slices on Bundle.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                          • value @ url
                                          • 292. Bundle.entry:practitionerRole.modifierExtension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                            ShortExtensions that cannot be ignored even if unrecognized
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            This element is affected by the following invariants: ele-1
                                            TypeExtension
                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                            Summarytrue
                                            Requirements

                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                            Alternate Namesextensions, user content, modifiers
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            294. Bundle.entry:practitionerRole.link
                                            Definition

                                            A series of links that provide context to this entry.

                                            ShortLinks related to this entry
                                            Control0..*
                                            TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
                                            Summarytrue
                                            296. Bundle.entry:practitionerRole.fullUrl
                                            Definition

                                            The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

                                            • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
                                            • Results from operations might involve resources that are not identified.
                                            ShortURI for resource (Absolute URL server address or URI for UUID/OID)
                                            Comments

                                            fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

                                            Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

                                            Control1..1
                                            This element is affected by the following invariants: ele-1
                                            Typeuri
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            298. Bundle.entry:practitionerRole.resource
                                            Definition

                                            A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

                                            ShortRoles/organizations the practitioner is associated with
                                            Control0..1
                                            TypePractitionerRole(FrPractitionerRoleExerciceAgregateur)
                                            300. Bundle.entry:practitionerRole.search
                                            Definition

                                            Information about the search process that lead to the creation of this entry.

                                            ShortSearch related information
                                            Control0..1
                                            This element is affected by the following invariants: ele-1, bdl-2
                                            TypeBackboneElement
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            302. Bundle.entry:practitionerRole.search.id
                                            Definition

                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                            ShortUnique id for inter-element referencing
                                            Control0..1
                                            Typestring
                                            XML FormatIn the XML format, this property is represented as an attribute.
                                            304. Bundle.entry:practitionerRole.search.extension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                            ShortAdditional content defined by implementations
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            This element is affected by the following invariants: ele-1
                                            TypeExtension
                                            Standard StatusNormative (from Normative)
                                            Alternate Namesextensions, user content
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            SlicingThis element introduces a set of slices on Bundle.entry.search.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                            • value @ url
                                            • 306. Bundle.entry:practitionerRole.search.modifierExtension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                              ShortExtensions that cannot be ignored even if unrecognized
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              This element is affected by the following invariants: ele-1
                                              TypeExtension
                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                              Summarytrue
                                              Requirements

                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                              Alternate Namesextensions, user content, modifiers
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              308. Bundle.entry:practitionerRole.search.mode
                                              Definition

                                              Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                                              Shortmatch | include | outcome - why this is in the result set
                                              Comments

                                              There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

                                              Control0..1
                                              This element is affected by the following invariants: ele-1
                                              BindingThe codes SHALL be taken from SearchEntryMode
                                              (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

                                              Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                                              Typecode
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              310. Bundle.entry:practitionerRole.search.score
                                              Definition

                                              When searching, the server's search ranking score for the entry.

                                              ShortSearch ranking (between 0 and 1)
                                              Comments

                                              Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

                                              See Patient Match for the EMPI search which relates to this element.

                                              Control0..1
                                              This element is affected by the following invariants: ele-1
                                              Typedecimal
                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              312. Bundle.entry:practitionerRole.request
                                              Definition

                                              Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

                                              ShortAdditional execution information (transaction/batch/history)
                                              Control0..1
                                              This element is affected by the following invariants: ele-1, bdl-3
                                              TypeBackboneElement
                                              Summarytrue
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              314. Bundle.entry:practitionerRole.request.id
                                              Definition

                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                              ShortUnique id for inter-element referencing
                                              Control0..1
                                              Typestring
                                              XML FormatIn the XML format, this property is represented as an attribute.
                                              316. Bundle.entry:practitionerRole.request.extension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                              ShortAdditional content defined by implementations
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              This element is affected by the following invariants: ele-1
                                              TypeExtension
                                              Standard StatusNormative (from Normative)
                                              Alternate Namesextensions, user content
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              SlicingThis element introduces a set of slices on Bundle.entry.request.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                              • value @ url
                                              • 318. Bundle.entry:practitionerRole.request.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                This element is affected by the following invariants: ele-1
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                320. Bundle.entry:practitionerRole.request.method
                                                Definition

                                                In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

                                                ShortGET | HEAD | POST | PUT | DELETE | PATCH
                                                Comments

                                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                                Control1..1
                                                This element is affected by the following invariants: ele-1
                                                BindingThe codes SHALL be taken from HTTPVerb
                                                (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

                                                HTTP verbs (in the HTTP command line). See HTTP rfc for details.

                                                Typecode
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                322. Bundle.entry:practitionerRole.request.url
                                                Definition

                                                The URL for this entry, relative to the root (the address to which the request is posted).

                                                ShortURL for HTTP equivalent of this entry
                                                Comments

                                                E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

                                                Control1..1
                                                This element is affected by the following invariants: ele-1
                                                Typeuri
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                324. Bundle.entry:practitionerRole.request.ifNoneMatch
                                                Definition

                                                If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

                                                ShortFor managing cache currency
                                                Comments

                                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                                Control0..1
                                                This element is affected by the following invariants: ele-1
                                                Typestring
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                326. Bundle.entry:practitionerRole.request.ifModifiedSince
                                                Definition

                                                Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

                                                ShortFor managing cache currency
                                                Comments

                                                Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

                                                Control0..1
                                                This element is affected by the following invariants: ele-1
                                                Typeinstant
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                328. Bundle.entry:practitionerRole.request.ifMatch
                                                Definition

                                                Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

                                                ShortFor managing update contention
                                                Comments

                                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                                Control0..1
                                                This element is affected by the following invariants: ele-1
                                                Typestring
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                330. Bundle.entry:practitionerRole.request.ifNoneExist
                                                Definition

                                                Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

                                                ShortFor conditional creates
                                                Comments

                                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                                Control0..1
                                                This element is affected by the following invariants: ele-1
                                                Typestring
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                332. Bundle.entry:practitionerRole.response
                                                Definition

                                                Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

                                                ShortResults of execution (transaction/batch/history)
                                                Control0..1
                                                This element is affected by the following invariants: ele-1, bdl-4
                                                TypeBackboneElement
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                334. Bundle.entry:practitionerRole.response.id
                                                Definition

                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                ShortUnique id for inter-element referencing
                                                Control0..1
                                                Typestring
                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                336. Bundle.entry:practitionerRole.response.extension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                ShortAdditional content defined by implementations
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                This element is affected by the following invariants: ele-1
                                                TypeExtension
                                                Standard StatusNormative (from Normative)
                                                Alternate Namesextensions, user content
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                SlicingThis element introduces a set of slices on Bundle.entry.response.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                • value @ url
                                                • 338. Bundle.entry:practitionerRole.response.modifierExtension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                  ShortExtensions that cannot be ignored even if unrecognized
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  This element is affected by the following invariants: ele-1
                                                  TypeExtension
                                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                  Summarytrue
                                                  Requirements

                                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                  Alternate Namesextensions, user content, modifiers
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  340. Bundle.entry:practitionerRole.response.status
                                                  Definition

                                                  The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

                                                  ShortStatus response code (text optional)
                                                  Comments

                                                  Note that FHIR strings SHALL NOT exceed 1MB in size

                                                  Control1..1
                                                  This element is affected by the following invariants: ele-1
                                                  Typestring
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  342. Bundle.entry:practitionerRole.response.location
                                                  Definition

                                                  The location header created by processing this operation, populated if the operation returns a location.

                                                  ShortThe location (if the operation returns a location)
                                                  Comments

                                                  see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                                                  Control0..1
                                                  This element is affected by the following invariants: ele-1
                                                  Typeuri
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  344. Bundle.entry:practitionerRole.response.etag
                                                  Definition

                                                  The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

                                                  ShortThe Etag for the resource (if relevant)
                                                  Comments

                                                  Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

                                                  Control0..1
                                                  This element is affected by the following invariants: ele-1
                                                  Typestring
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  346. Bundle.entry:practitionerRole.response.lastModified
                                                  Definition

                                                  The date/time that the resource was modified on the server.

                                                  ShortServer's date time modified
                                                  Comments

                                                  This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

                                                  Control0..1
                                                  This element is affected by the following invariants: ele-1
                                                  Typeinstant
                                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  348. Bundle.entry:practitionerRole.response.outcome
                                                  Definition

                                                  An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

                                                  ShortOperationOutcome with hints and warnings (for batch/transaction)
                                                  Comments

                                                  For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

                                                  This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

                                                  Control0..1
                                                  TypeResource
                                                  Summarytrue
                                                  350. Bundle.entry:healthcareserviceCPTS
                                                  Slice NamehealthcareserviceCPTS
                                                  Definition

                                                  An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

                                                  ShortEntry in the bundle - will have a resource or information
                                                  Control0..*
                                                  This element is affected by the following invariants: ele-1
                                                  TypeBackboneElement
                                                  Summarytrue
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
                                                  bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
                                                  352. Bundle.entry:healthcareserviceCPTS.id
                                                  Definition

                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                  ShortUnique id for inter-element referencing
                                                  Control0..1
                                                  Typestring
                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                  354. Bundle.entry:healthcareserviceCPTS.extension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                  ShortAdditional content defined by implementations
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  This element is affected by the following invariants: ele-1
                                                  TypeExtension
                                                  Standard StatusNormative (from Normative)
                                                  Alternate Namesextensions, user content
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  SlicingThis element introduces a set of slices on Bundle.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                  • value @ url
                                                  • 356. Bundle.entry:healthcareserviceCPTS.modifierExtension
                                                    Definition

                                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                    ShortExtensions that cannot be ignored even if unrecognized
                                                    Comments

                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                    Control0..*
                                                    This element is affected by the following invariants: ele-1
                                                    TypeExtension
                                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                    Summarytrue
                                                    Requirements

                                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                    Alternate Namesextensions, user content, modifiers
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    358. Bundle.entry:healthcareserviceCPTS.link
                                                    Definition

                                                    A series of links that provide context to this entry.

                                                    ShortLinks related to this entry
                                                    Control0..*
                                                    TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
                                                    Summarytrue
                                                    360. Bundle.entry:healthcareserviceCPTS.fullUrl
                                                    Definition

                                                    The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

                                                    • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
                                                    • Results from operations might involve resources that are not identified.
                                                    ShortURI for resource (Absolute URL server address or URI for UUID/OID)
                                                    Comments

                                                    fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

                                                    Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

                                                    Control1..1
                                                    This element is affected by the following invariants: ele-1
                                                    Typeuri
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    362. Bundle.entry:healthcareserviceCPTS.resource
                                                    Definition

                                                    The details of a healthcare service available at a location.

                                                    ShortThe details of a healthcare service available at a location
                                                    Control0..1
                                                    TypeHealthcareService(FrHealthcareServiceAgregateurCPTS)
                                                    364. Bundle.entry:healthcareserviceCPTS.search
                                                    Definition

                                                    Information about the search process that lead to the creation of this entry.

                                                    ShortSearch related information
                                                    Control0..1
                                                    This element is affected by the following invariants: ele-1, bdl-2
                                                    TypeBackboneElement
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    366. Bundle.entry:healthcareserviceCPTS.search.id
                                                    Definition

                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                    ShortUnique id for inter-element referencing
                                                    Control0..1
                                                    Typestring
                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                    368. Bundle.entry:healthcareserviceCPTS.search.extension
                                                    Definition

                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                    ShortAdditional content defined by implementations
                                                    Comments

                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                    Control0..*
                                                    This element is affected by the following invariants: ele-1
                                                    TypeExtension
                                                    Standard StatusNormative (from Normative)
                                                    Alternate Namesextensions, user content
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    SlicingThis element introduces a set of slices on Bundle.entry.search.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                    • value @ url
                                                    • 370. Bundle.entry:healthcareserviceCPTS.search.modifierExtension
                                                      Definition

                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                      Comments

                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                      Control0..*
                                                      This element is affected by the following invariants: ele-1
                                                      TypeExtension
                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                      Summarytrue
                                                      Requirements

                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                      Alternate Namesextensions, user content, modifiers
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      372. Bundle.entry:healthcareserviceCPTS.search.mode
                                                      Definition

                                                      Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                                                      Shortmatch | include | outcome - why this is in the result set
                                                      Comments

                                                      There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

                                                      Control0..1
                                                      This element is affected by the following invariants: ele-1
                                                      BindingThe codes SHALL be taken from SearchEntryMode
                                                      (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

                                                      Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                                                      Typecode
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      374. Bundle.entry:healthcareserviceCPTS.search.score
                                                      Definition

                                                      When searching, the server's search ranking score for the entry.

                                                      ShortSearch ranking (between 0 and 1)
                                                      Comments

                                                      Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

                                                      See Patient Match for the EMPI search which relates to this element.

                                                      Control0..1
                                                      This element is affected by the following invariants: ele-1
                                                      Typedecimal
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      376. Bundle.entry:healthcareserviceCPTS.request
                                                      Definition

                                                      Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

                                                      ShortAdditional execution information (transaction/batch/history)
                                                      Control0..1
                                                      This element is affected by the following invariants: ele-1, bdl-3
                                                      TypeBackboneElement
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      378. Bundle.entry:healthcareserviceCPTS.request.id
                                                      Definition

                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                      ShortUnique id for inter-element referencing
                                                      Control0..1
                                                      Typestring
                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                      380. Bundle.entry:healthcareserviceCPTS.request.extension
                                                      Definition

                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                      ShortAdditional content defined by implementations
                                                      Comments

                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                      Control0..*
                                                      This element is affected by the following invariants: ele-1
                                                      TypeExtension
                                                      Standard StatusNormative (from Normative)
                                                      Alternate Namesextensions, user content
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      SlicingThis element introduces a set of slices on Bundle.entry.request.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                      • value @ url
                                                      • 382. Bundle.entry:healthcareserviceCPTS.request.modifierExtension
                                                        Definition

                                                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                        ShortExtensions that cannot be ignored even if unrecognized
                                                        Comments

                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                        Control0..*
                                                        This element is affected by the following invariants: ele-1
                                                        TypeExtension
                                                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                        Summarytrue
                                                        Requirements

                                                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                        Alternate Namesextensions, user content, modifiers
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        384. Bundle.entry:healthcareserviceCPTS.request.method
                                                        Definition

                                                        In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

                                                        ShortGET | HEAD | POST | PUT | DELETE | PATCH
                                                        Comments

                                                        Note that FHIR strings SHALL NOT exceed 1MB in size

                                                        Control1..1
                                                        This element is affected by the following invariants: ele-1
                                                        BindingThe codes SHALL be taken from HTTPVerb
                                                        (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

                                                        HTTP verbs (in the HTTP command line). See HTTP rfc for details.

                                                        Typecode
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        386. Bundle.entry:healthcareserviceCPTS.request.url
                                                        Definition

                                                        The URL for this entry, relative to the root (the address to which the request is posted).

                                                        ShortURL for HTTP equivalent of this entry
                                                        Comments

                                                        E.g. for a Patient Create, the method would be "POST" and the URL would be "Patient". For a Patient Update, the method would be PUT and the URL would be "Patient/[id]".

                                                        Control1..1
                                                        This element is affected by the following invariants: ele-1
                                                        Typeuri
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        388. Bundle.entry:healthcareserviceCPTS.request.ifNoneMatch
                                                        Definition

                                                        If the ETag values match, return a 304 Not Modified status. See the API documentation for "Conditional Read".

                                                        ShortFor managing cache currency
                                                        Comments

                                                        Note that FHIR strings SHALL NOT exceed 1MB in size

                                                        Control0..1
                                                        This element is affected by the following invariants: ele-1
                                                        Typestring
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        390. Bundle.entry:healthcareserviceCPTS.request.ifModifiedSince
                                                        Definition

                                                        Only perform the operation if the last updated date matches. See the API documentation for "Conditional Read".

                                                        ShortFor managing cache currency
                                                        Comments

                                                        Note: This is intended for where precisely observed times are required, typically system logs etc., and not human-reported times - for them, see date and dateTime (which can be as precise as instant, but is not required to be) below. Time zone is always required

                                                        Control0..1
                                                        This element is affected by the following invariants: ele-1
                                                        Typeinstant
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        392. Bundle.entry:healthcareserviceCPTS.request.ifMatch
                                                        Definition

                                                        Only perform the operation if the Etag value matches. For more information, see the API section "Managing Resource Contention".

                                                        ShortFor managing update contention
                                                        Comments

                                                        Note that FHIR strings SHALL NOT exceed 1MB in size

                                                        Control0..1
                                                        This element is affected by the following invariants: ele-1
                                                        Typestring
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        394. Bundle.entry:healthcareserviceCPTS.request.ifNoneExist
                                                        Definition

                                                        Instruct the server not to perform the create if a specified resource already exists. For further information, see the API documentation for "Conditional Create". This is just the query portion of the URL - what follows the "?" (not including the "?").

                                                        ShortFor conditional creates
                                                        Comments

                                                        Note that FHIR strings SHALL NOT exceed 1MB in size

                                                        Control0..1
                                                        This element is affected by the following invariants: ele-1
                                                        Typestring
                                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        396. Bundle.entry:healthcareserviceCPTS.response
                                                        Definition

                                                        Indicates the results of processing the corresponding 'request' entry in the batch or transaction being responded to or what the results of an operation where when returning history.

                                                        ShortResults of execution (transaction/batch/history)
                                                        Control0..1
                                                        This element is affected by the following invariants: ele-1, bdl-4
                                                        TypeBackboneElement
                                                        Summarytrue
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        398. Bundle.entry:healthcareserviceCPTS.response.id
                                                        Definition

                                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                        ShortUnique id for inter-element referencing
                                                        Control0..1
                                                        Typestring
                                                        XML FormatIn the XML format, this property is represented as an attribute.
                                                        400. Bundle.entry:healthcareserviceCPTS.response.extension
                                                        Definition

                                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                        ShortAdditional content defined by implementations
                                                        Comments

                                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                        Control0..*
                                                        This element is affected by the following invariants: ele-1
                                                        TypeExtension
                                                        Standard StatusNormative (from Normative)
                                                        Alternate Namesextensions, user content
                                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                        SlicingThis element introduces a set of slices on Bundle.entry.response.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                        • value @ url
                                                        • 402. Bundle.entry:healthcareserviceCPTS.response.modifierExtension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                          ShortExtensions that cannot be ignored even if unrecognized
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          This element is affected by the following invariants: ele-1
                                                          TypeExtension
                                                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                          Summarytrue
                                                          Requirements

                                                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                          Alternate Namesextensions, user content, modifiers
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          404. Bundle.entry:healthcareserviceCPTS.response.status
                                                          Definition

                                                          The status code returned by processing this entry. The status SHALL start with a 3 digit HTTP code (e.g. 404) and may contain the standard HTTP description associated with the status code.

                                                          ShortStatus response code (text optional)
                                                          Comments

                                                          Note that FHIR strings SHALL NOT exceed 1MB in size

                                                          Control1..1
                                                          This element is affected by the following invariants: ele-1
                                                          Typestring
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          406. Bundle.entry:healthcareserviceCPTS.response.location
                                                          Definition

                                                          The location header created by processing this operation, populated if the operation returns a location.

                                                          ShortThe location (if the operation returns a location)
                                                          Comments

                                                          see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                                                          Control0..1
                                                          This element is affected by the following invariants: ele-1
                                                          Typeuri
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          408. Bundle.entry:healthcareserviceCPTS.response.etag
                                                          Definition

                                                          The Etag for the resource, if the operation for the entry produced a versioned resource (see Resource Metadata and Versioning and Managing Resource Contention).

                                                          ShortThe Etag for the resource (if relevant)
                                                          Comments

                                                          Etags match the Resource.meta.versionId. The ETag has to match the version id in the header if a resource is included.

                                                          Control0..1
                                                          This element is affected by the following invariants: ele-1
                                                          Typestring
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          410. Bundle.entry:healthcareserviceCPTS.response.lastModified
                                                          Definition

                                                          The date/time that the resource was modified on the server.

                                                          ShortServer's date time modified
                                                          Comments

                                                          This has to match the same time in the meta header (meta.lastUpdated) if a resource is included.

                                                          Control0..1
                                                          This element is affected by the following invariants: ele-1
                                                          Typeinstant
                                                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          412. Bundle.entry:healthcareserviceCPTS.response.outcome
                                                          Definition

                                                          An OperationOutcome containing hints and warnings produced as part of processing this entry in a batch or transaction.

                                                          ShortOperationOutcome with hints and warnings (for batch/transaction)
                                                          Comments

                                                          For a POST/PUT operation, this is the equivalent outcome that would be returned for prefer = operationoutcome - except that the resource is always returned whether or not the outcome is returned.

                                                          This outcome is not used for error responses in batch/transaction, only for hints and warnings. In a batch operation, the error will be in Bundle.entry.response, and for transaction, there will be a single OperationOutcome instead of a bundle in the case of an error.

                                                          Control0..1
                                                          TypeResource
                                                          Summarytrue
                                                          414. Bundle.entry:organizationAgregateurCPTS
                                                          Slice NameorganizationAgregateurCPTS
                                                          Definition

                                                          An entry in a bundle resource - will either contain a resource or information about a resource (transactions and history only).

                                                          ShortEntry in the bundle - will have a resource or information
                                                          Control0..*
                                                          This element is affected by the following invariants: ele-1
                                                          TypeBackboneElement
                                                          Summarytrue
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          bdl-8: fullUrl cannot be a version specific reference (fullUrl.contains('/_history/').not())
                                                          bdl-5: must be a resource unless there's a request or response (resource.exists() or request.exists() or response.exists())
                                                          416. Bundle.entry:organizationAgregateurCPTS.id
                                                          Definition

                                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                          ShortUnique id for inter-element referencing
                                                          Control0..1
                                                          Typestring
                                                          XML FormatIn the XML format, this property is represented as an attribute.
                                                          418. Bundle.entry:organizationAgregateurCPTS.extension
                                                          Definition

                                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                          ShortAdditional content defined by implementations
                                                          Comments

                                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                          Control0..*
                                                          This element is affected by the following invariants: ele-1
                                                          TypeExtension
                                                          Standard StatusNormative (from Normative)
                                                          Alternate Namesextensions, user content
                                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                          SlicingThis element introduces a set of slices on Bundle.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                          • value @ url
                                                          • 420. Bundle.entry:organizationAgregateurCPTS.modifierExtension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                            ShortExtensions that cannot be ignored even if unrecognized
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            This element is affected by the following invariants: ele-1
                                                            TypeExtension
                                                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                            Summarytrue
                                                            Requirements

                                                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                            Alternate Namesextensions, user content, modifiers
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            422. Bundle.entry:organizationAgregateurCPTS.link
                                                            Definition

                                                            A series of links that provide context to this entry.

                                                            ShortLinks related to this entry
                                                            Control0..*
                                                            TypeSeettp://hl7.org/fhir/StructureDefinition/Bundle#Bundle.link
                                                            Summarytrue
                                                            424. Bundle.entry:organizationAgregateurCPTS.fullUrl
                                                            Definition

                                                            The Absolute URL for the resource. The fullUrl SHALL NOT disagree with the id in the resource - i.e. if the fullUrl is not a urn:uuid, the URL shall be version-independent URL consistent with the Resource.id. The fullUrl is a version independent reference to the resource. The fullUrl element SHALL have a value except that:

                                                            • fullUrl can be empty on a POST (although it does not need to when specifying a temporary id for reference in the bundle)
                                                            • Results from operations might involve resources that are not identified.
                                                            ShortURI for resource (Absolute URL server address or URI for UUID/OID)
                                                            Comments

                                                            fullUrl might not be unique in the context of a resource. Note that since FHIR resources do not need to be served through the FHIR API, the fullURL might be a URN or an absolute URL that does not end with the logical id of the resource (Resource.id). However, but if the fullUrl does look like a RESTful server URL (e.g. meets the regex, then the 'id' portion of the fullUrl SHALL end with the Resource.id.

                                                            Note that the fullUrl is not the same as the canonical URL - it's an absolute url for an endpoint serving the resource (these will happen to have the same value on the canonical server for the resource with the canonical URL).

                                                            Control1..1
                                                            This element is affected by the following invariants: ele-1
                                                            Typeuri
                                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            426. Bundle.entry:organizationAgregateurCPTS.resource
                                                            Definition

                                                            A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc.

                                                            ShortA grouping of people or organizations with a common purpose
                                                            Control0..1
                                                            TypeOrganization(FrOrganizationAgregateurCPTS)
                                                            428. Bundle.entry:organizationAgregateurCPTS.search
                                                            Definition

                                                            Information about the search process that lead to the creation of this entry.

                                                            ShortSearch related information
                                                            Control0..1
                                                            This element is affected by the following invariants: ele-1, bdl-2
                                                            TypeBackboneElement
                                                            Summarytrue
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            430. Bundle.entry:organizationAgregateurCPTS.search.id
                                                            Definition

                                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                            ShortUnique id for inter-element referencing
                                                            Control0..1
                                                            Typestring
                                                            XML FormatIn the XML format, this property is represented as an attribute.
                                                            432. Bundle.entry:organizationAgregateurCPTS.search.extension
                                                            Definition

                                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                            ShortAdditional content defined by implementations
                                                            Comments

                                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                            Control0..*
                                                            This element is affected by the following invariants: ele-1
                                                            TypeExtension
                                                            Standard StatusNormative (from Normative)
                                                            Alternate Namesextensions, user content
                                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                            SlicingThis element introduces a set of slices on Bundle.entry.search.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                            • value @ url
                                                            • 434. Bundle.entry:organizationAgregateurCPTS.search.modifierExtension
                                                              Definition

                                                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                              ShortExtensions that cannot be ignored even if unrecognized
                                                              Comments

                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                              Control0..*
                                                              This element is affected by the following invariants: ele-1
                                                              TypeExtension
                                                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                              Summarytrue
                                                              Requirements

                                                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                              Alternate Namesextensions, user content, modifiers
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                              436. Bundle.entry:organizationAgregateurCPTS.search.mode
                                                              Definition

                                                              Why this entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                                                              Shortmatch | include | outcome - why this is in the result set
                                                              Comments

                                                              There is only one mode. In some corner cases, a resource may be included because it is both a match and an include. In these circumstances, 'match' takes precedence.

                                                              Control0..1
                                                              This element is affected by the following invariants: ele-1
                                                              BindingThe codes SHALL be taken from SearchEntryMode
                                                              (required to http://hl7.org/fhir/ValueSet/search-entry-mode|4.0.1)

                                                              Why an entry is in the result set - whether it's included as a match or because of an _include requirement, or to convey information or warning information about the search process.

                                                              Typecode
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              438. Bundle.entry:organizationAgregateurCPTS.search.score
                                                              Definition

                                                              When searching, the server's search ranking score for the entry.

                                                              ShortSearch ranking (between 0 and 1)
                                                              Comments

                                                              Servers are not required to return a ranking score. 1 is most relevant, and 0 is least relevant. Often, search results are sorted by score, but the client may specify a different sort order.

                                                              See Patient Match for the EMPI search which relates to this element.

                                                              Control0..1
                                                              This element is affected by the following invariants: ele-1
                                                              Typedecimal
                                                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              440. Bundle.entry:organizationAgregateurCPTS.request
                                                              Definition

                                                              Additional information about how this entry should be processed as part of a transaction or batch. For history, it shows how the entry was processed to create the version contained in the entry.

                                                              ShortAdditional execution information (transaction/batch/history)
                                                              Control0..1
                                                              This element is affected by the following invariants: ele-1, bdl-3
                                                              TypeBackboneElement
                                                              Summarytrue
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              442. Bundle.entry:organizationAgregateurCPTS.request.id
                                                              Definition

                                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                              ShortUnique id for inter-element referencing
                                                              Control0..1
                                                              Typestring
                                                              XML FormatIn the XML format, this property is represented as an attribute.
                                                              444. Bundle.entry:organizationAgregateurCPTS.request.extension
                                                              Definition

                                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                              ShortAdditional content defined by implementations
                                                              Comments

                                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                              Control0..*
                                                              This element is affected by the following invariants: ele-1
                                                              TypeExtension
                                                              Standard StatusNormative (from Normative)
                                                              Alternate Namesextensions, user content
                                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                              SlicingThis element introduces a set of slices on Bundle.entry.request.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                              • value @ url
                                                              • 446. Bundle.entry:organizationAgregateurCPTS.request.modifierExtension
                                                                Definition

                                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                                ShortExtensions that cannot be ignored even if unrecognized
                                                                Comments

                                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                                Control0..*
                                                                This element is affected by the following invariants: ele-1
                                                                TypeExtension
                                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                                Summarytrue
                                                                Requirements

                                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                                Alternate Namesextensions, user content, modifiers
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                                448. Bundle.entry:organizationAgregateurCPTS.request.method
                                                                Definition

                                                                In a transaction or batch, this is the HTTP action to be executed for this entry. In a history bundle, this indicates the HTTP action that occurred.

                                                                ShortGET | HEAD | POST | PUT | DELETE | PATCH
                                                                Comments

                                                                Note that FHIR strings SHALL NOT exceed 1MB in size

                                                                Control1..1
                                                                This element is affected by the following invariants: ele-1
                                                                BindingThe codes SHALL be taken from HTTPVerb
                                                                (required to http://hl7.org/fhir/ValueSet/http-verb|4.0.1)

                                                                HTTP verbs (in the HTTP command line). See HTTP rfc for details.

                                                                Typecode
                                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                                Summarytrue
                                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                                450. Bundle.entry:organizationAgregateurCPTS.request.url